PartsTable TECHNICAL DATA SHEET
NSN 5360-00-131-7877Government record, cited

Spring, Helical, Torsion5360-00-131-7877

NSN 5360-00-131-7877 · NIIN 001317877
FSC 5360 — Coil, Flat, Leaf, and Wire Springs · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5360-00-131-7877 · 5360001317877 · NIIN 001317877 · 00-131-7877 · FSC 5360 Coil, Flat, Leaf, and Wire Springs
Nearby stock numbers  ·
Features
  • Spring,helical,torsion — FSC 5360
  • Spring Free Outside Diameter: 0.640 INCHES NOMINAL IN
  • End Style: OFFSET EYE OVERALL
  • End Length: 0.438 INCHES NOMINAL BOTH ENDS IN
  • Center Section Width: 0.688 INCHES NOMINAL IN
  • Style Designator: SINGLE TORSION RIGHT HAND
  • Material Document and Classification: MIL-W-6101 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
  • Spring Free Length: 4.300 INCHES NOMINAL IN
Identification
  • NSN: 5360-00-131-7877
  • NIIN: 001317877
  • FSC: 5360 — Coil, Flat, Leaf, and Wire Springs
  • FSG: 53 — Hardware and Abrasives
General Description

The Spring,helical,torsion, cataloged under National Stock Number 5360-00-131-7877, is classified within Federal Supply Class 5360 (Coil, Flat, Leaf, and Wire Springs) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5360-00-131-7877
Item NameSpring,helical,torsion
FSC / FSG5360 / 53 — Coil, Flat, Leaf, and Wire Springs
StatusACTIVE
Spring Free Outside Diameter0.640 INCHES NOMINAL IN
End StyleOFFSET EYE OVERALL
End Length0.438 INCHES NOMINAL BOTH ENDS IN
Center Section Width0.688 INCHES NOMINAL IN
Style DesignatorSINGLE TORSION RIGHT HAND
Material Document and ClassificationMIL-W-6101 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
Spring Free Length4.300 INCHES NOMINAL IN
Coil Axis to Center Section Distance1.250 INCHES NOMINAL IN
Inside Diameter0.460 INCHES NOMINAL IN
End Length From First Bend to Second Bend or End0.380 INCHES NOMINAL OVERALL IN
Coil Quantity8
End Length From Coil Axis to First Bend0.313 INCHES NOMINAL OVERALL IN
Center Loop Radius0.250 INCHES NOMINAL IN
Coil Helix DirectionLEFT-HAND
MaterialSTEEL OVERALL
End Angular RelationshipEND W/LH HELIX OF COIL ANGLED TO CENTER SECTION AND END W/RH HELIX OF COIL ANGLED TO CENTER SECTION
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
⇄ Related Items 1
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
3040-00-469-9205178593 POSSIBLE MATCH
SHAFT,SHOULDERED
Possible match (shared part number)Curtiss-Wright Controls, Inc. Dba Curtiss Wright Div Actuation Division
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
178593 3/2 Design control — primary reference
U.S. Government activity
Related Parts
3040-00-469-9205POSSIBLE MATCH
SHAFT,SHOULDERED
178593

Frequently Asked Questions

What is NSN 5360-00-131-7877?

NSN 5360-00-131-7877 is a Spring,helical,torsion, classified under FSC 5360, Coil, Flat, Leaf, and Wire Springs. Status: active.

What NSN replaces 5360-00-131-7877?

1 possible match (shared part number, not a government interchangeability claim): 3040-00-469-9205. Verify interchangeability with system specifications before substitution.

What are the specifications of 5360-00-131-7877?

Key specifications for 5360-00-131-7877: Spring Free Outside Diameter: 0.640 INCHES NOMINAL IN; End Style: OFFSET EYE OVERALL; End Length: 0.438 INCHES NOMINAL BOTH ENDS IN; Center Section Width: 0.688 INCHES NOMINAL IN. 16 specifications are documented in the U.S. Government catalog.

Is NSN 5360-00-131-7877 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com