PartsTable
Technical Data Sheet
Download PDF

5359-008 3IN — VALVE,STOP-CHECK

✓ Government record, cited
— · GATE VALVE
PRODUCT OVERVIEW

5359-008 3IN: VALVE,STOP-CHECK.

The VALVE,STOP-CHECK is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY STEM, valve_size: 3.000 INCHES IN, bonnet_type: OUTSIDE SCREW-YOKE, flange_shape: ROUND WITH HOLES ALL ENDS, connection_type: FLANGE ALL ENDS, special_features: VALVE SIZE 3 IN. IN.

This part is cataloged in the U.S. Government catalog under NSN 4820-00-595-0494, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5359-008 3IN
NSN: 4820-00-595-0494
FSC: 4820 — Valves, Nonpowered
CAGE: 76364 — MILWAUKEE VALVE CO, INC DIV MILWAUKEE VALVE COMPANY, LLC (USA)
SPECIFICATIONS
materialNICKEL ALLOY STEM
valve_size3.000 INCHES IN
bonnet_typeOUTSIDE SCREW-YOKE
flange_shapeROUND WITH HOLES ALL ENDS
connection_typeFLANGE ALL ENDS
special_featuresVALVE SIZE 3 IN. IN
style_designatorSTRAIGHT THRU FLANGED ENDS
mounting_positionHORIZONTAL
nominal_thickness0.500 INCHES ALL ENDS IN
bolt_hole_quantity8 ALL ENDS
flange_face_designPLAIN ALL ENDS
operating_pressure100.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
NSN4820-00-595-0494
COMPONENT DIAGRAM
GATE VALVE — FULL OPEN OR FULL CLOSE ONLY Rising STEM BONNET FLOW → → FLOW SEATS — — SIZE: — · — · — PN: 5359-008 3IN · OEM ⚠ VERIFY BEFORE ORDERING Gate valves = FULL OPEN or FULL CLOSE only — never throttle. Partial opening causes seat erosion and vibration. ✓ BROKER TIP Rising stem shows valve position visually — easier maintenance. Non-rising stem saves headroom. PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLOW CONTROL DEVICE: DISK
•
FLANGE SHAPE: ROUND WITH HOLES ALL ENDS
•
RENEWABLE SEAT RING TYPE: THREADED
•
FLANGE FACE DESIGN: PLAIN ALL ENDS
•
BOLT CIRCLE NOMINAL DIAMETER: 5.500 INCHES ALL ENDS IN
•
MOUNTING POSITION: HORIZONTAL
•
CONNECTION TYPE: FLANGE ALL ENDS
•
STYLE DESIGNATOR: STRAIGHT THRU FLANGED ENDS
TECHNICAL CHARACTERISTICS
FLOW CONTROL DEVICEDISK
FLANGE SHAPEROUND WITH HOLES ALL ENDS
RENEWABLE SEAT RING TYPETHREADED
FLANGE FACE DESIGNPLAIN ALL ENDS
BOLT CIRCLE NOMINAL DIAMETER5.500 INCHES ALL ENDS IN
MOUNTING POSITIONHORIZONTAL
CONNECTION TYPEFLANGE ALL ENDS
STYLE DESIGNATORSTRAIGHT THRU FLANGED ENDS
BOLT HOLE NOMINAL DIAMETER0.562 INCHES ALL ENDS IN
OPERATING PRESSURE100.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
SUBSTITUTES & CROSS-REFERENCES 2
5000S4824-1385541Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
803-1385541Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 5359-008 3IN?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5359-008 3IN?
5359-008 3IN is a VALVE,STOP-CHECK.
What parts can replace 5359-008 3IN?
There are 2 known substitutes for 5359-008 3IN: 5000S4824-1385541, 803-1385541. Substitute compatibility should be verified for your specific system.
What is the NSN for 5359-008 3IN?
5359-008 3IN is cataloged in the U.S. Government catalog under NSN 4820-00-595-0494. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5359-008 3IN