The GEAR,INTERNAL is a the manufacturer industrial component. Key specifications include head_style: PAN, head_height: 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN, thread_length: 0.938 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN, screw_material: STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1013. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3020-00-023-0115, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| head_style | PAN |
| head_height | 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN |
| thread_class | 2A A |
| head_diameter | 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN |
| thread_length | 0.938 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN |
| screw_material | STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1013 |
| fastener_length | 1.000 INCHES NOMINAL IN |
| thread_direction | RIGHT-HAND |
| internal_drive_style | CROSS RECESS TYPE 1 |
| nominal_thread_diameter | 0.190 INCHES IN |
| screw_surface_treatment | CADMIUM AND CHROMATE |
| minimum_tensile_strength | 60000 POUNDS PER SQUARE INCH LBS |
| NSN | 3020-00-023-0115 |
| PITCH DIAMETER | 0.6560 INCHES NOMINAL IN |
| BORE NOMINAL DIAMETER | 0.090 INCHES BOTH ENDS IN |
| NOMINAL OVERALL LENGTH | 0.390 INCHES IN |
| TEETH QUANTITY | 42 |
| SURFACE TREATMENT | ANODIZE OVERALL |
| PRESSURE ANGLE | 20.0000 DEGREES |
| FACE NOMINAL WIDTH | 0.220 INCHES IN |
| BORE STYLE | PLAIN BOTH ENDS |
| TOOTH FORM | STANDARD |
| TEETH TYPE | SPUR |