PartsTable
Technical Data Sheet
Download PDF

53546-524-S9 — NUT,SELF-LOCKING,EXTENDED WASHER

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

53546-524-S9: NUT,SELF-LOCKING,EXTENDED WASHER.

NUT,SELF-LOCKING,EXTENDED WASHER. Key specifications include material: STEEL COMP 1137 OVERALL, nut_style: DOUBLE HEXAGON, thread_class: 3B, thread_series: UNIFIED NATIONAL JOINT FINE (UNJF), overall_height: 0.349 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN, hardness_rating: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-014-5134, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
53546-524-S9
NSN: 5310-01-014-5134
FSC: 5310 — Nuts and Washers
CAGE: 56878 — SPS TECHNOLOGIES, LLC DBA PB FASTENERS (USA)
SPECIFICATIONS
materialSTEEL COMP 1137 OVERALL
nut_styleDOUBLE HEXAGON
thread_class3B
thread_seriesUNIFIED NATIONAL JOINT FINE (UNJF)
overall_height0.349 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN
hardness_rating26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
locking_featurePREVAILING TORQUE ALL METAL DESIGN
thread_directionRIGHT-HAND
washer_thickness0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
countersink_angle90.0 DEGREES NOMINAL NUT
surface_treatmentCADMIUM OVERALL
width_across_flats0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM IN
NSN5310-01-014-5134
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 53546-524-S9 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WASHER OUTSIDE DIAMETER: 0.521 INCHES MINIMUM AND 0.536 INCHES MAXIMUM IN
•
WIDTH ACROSS FLATS: 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNIFIED NATIONAL JOINT FINE (UNJF)
•
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
•
WASHER THICKNESS: 0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5024 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.349 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN
WASHER OUTSIDE DIAMETER0.521 INCHES MINIMUM AND 0.536 INCHES MAXIMUM IN
WIDTH ACROSS FLATS0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONAMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNIFIED NATIONAL JOINT FINE (UNJF)
HARDNESS RATING26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
WASHER THICKNESS0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5024 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.312 INCHES IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
517779Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 53546-524-S9?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 53546-524-S9?
53546-524-S9 is a NUT,SELF-LOCKING,EXTENDED WASHER.
What parts can replace 53546-524-S9?
There is 1 known substitute for 53546-524-S9: 517779. Substitute compatibility should be verified for your specific system.
What is the NSN for 53546-524-S9?
53546-524-S9 is cataloged in the U.S. Government catalog under NSN 5310-01-014-5134. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 53546-524-S9

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.