PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 535454
535454 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

CAPACITOR,FIXED,CERAMIC DIELECTR. Key specifications include width: 4.029 INCHES MINIMUM AND 4.030 INCHES MAXIMUM IN, thickness: 0.724 INCHES MINIMUM AND 0.734 INCHES MAXIMUM IN, arc_length: 8.141 INCHES MINIMUM AND 8.161 INCHES MAXIMUM IN, lining_style: SEGMENT PLAIN, minor_radius: 7.859 INCHES NOMINAL IN, application_type: DRY. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-027-9090, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
535454
NSN: 5315-00-027-9090
FSC: 5315
CAGE: 64547 — HONEYWELL INTERNATIONAL, INC DIV AEROSPACE-TUCSON (USA)
SPECIFICATIONS
width4.029 INCHES MINIMUM AND 4.030 INCHES MAXIMUM IN
thickness0.724 INCHES MINIMUM AND 0.734 INCHES MAXIMUM IN
arc_length8.141 INCHES MINIMUM AND 8.161 INCHES MAXIMUM IN
lining_styleSEGMENT PLAIN
minor_radius7.859 INCHES NOMINAL IN
application_typeDRY
attachment_methodRIVETED
features_providedRIGID FRICTION LINING
fabrication_methodMOLDED
hole_arrangement_styleDOUBLE EVEN
hole_type_and_quantity4 COUNTERBORED
NSN5315-00-027-9090
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 535454 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DIAMETER: 0.184 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
•
EFFECTIVE LENGTH: 0.587 INCHES MINIMUM AND 0.592 INCHES MAXIMUM IN
•
HARDNESS RATING: 35.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
•
FIRST END STYLE: CHAMFERED
•
UNDERCUT WIDTH: 0.018 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: GROOVE
•
FIRST END LOCATION: BOTH ENDS
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
DIAMETER0.184 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
EFFECTIVE LENGTH0.587 INCHES MINIMUM AND 0.592 INCHES MAXIMUM IN
HARDNESS RATING35.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
FIRST END STYLECHAMFERED
UNDERCUT WIDTH0.018 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN
STYLE DESIGNATORGROOVE
FIRST END LOCATIONBOTH ENDS
UNDERCUT DIAMETER0.173 INCHES MINIMUM AND 0.176 INCHES MAXIMUM IN
OVERALL LENGTH0.705 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
7-10-11Interchangeable
interchangeable cross-reference
interchangeable
535348Interchangeable
interchangeable cross-reference
interchangeable
7348276Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 535454?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 535454?
535454 is a CAPACITOR,FIXED,CERAMIC DIELECTR.
What parts can replace 535454?
There are 3 known substitutes for 535454: 7-10-11, 535348, 7348276. Substitute compatibility should be verified for your specific system.
What is the NSN for 535454?
535454 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-027-9090. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 535454

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026