535364: RATCHET WHEEL.
The RATCHET WHEEL is a the manufacturer industrial component. Key specifications include material: STEEL, teeth_quantity: 200, hardness_rating: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM, outside_diameter: 4.2349 INCHES MINIMUM AND 4.2399 INCHES MAXIMUM IN, bore_nominal_diameter: 3.240 INCHES IN. This part is cataloged in the U.S.
Government catalog under NSN 3020-00-858-8530, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | STEEL |
| teeth_quantity | 200 |
| hardness_rating | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM |
| outside_diameter | 4.2349 INCHES MINIMUM AND 4.2399 INCHES MAXIMUM IN |
| bore_nominal_diameter | 3.240 INCHES IN |
| NSN | 3020-00-858-8530 |
| BORE NOMINAL DIAMETER | 3.240 INCHES IN |
| TEETH QUANTITY | 200 |
| OUTSIDE DIAMETER | 4.2349 INCHES MINIMUM AND 4.2399 INCHES MAXIMUM IN |
| HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM |
| SPECIAL FEATURES | EXTERNAL SPUR SPLINE DATA,66 TEETH ON BASIS OF 67,0.182 IN. NOM FACE WIDTH,4.1875 IN. PITCH DIA,30 DEGREE PRESSURE ANGLE,RATCHET DATA,LEFT SIDE,0.215 IN. FACE WIDTH WITH 60 DFG BEVEL ON INNER AND OUTER EDGES,0.05970 IN. CIRCULAR PITCH,37 DEGREE TOOTH ANGLE,TWO HOLES 0.106 IN.DIA.DRILLED IN RIGHT FACE 0.135 IN. DEEP AT 90 AND 285 DEG ON 3.620 IN. DIA BOLT CIRCLE IN |
| MATERIAL | STEEL |
No substitute or cross-reference records for this part.