PartsTable
Technical Data Sheet
PartsTable / MRO / 5351-072
5351-072 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include body_style: RECTANGULAR W/MOUNTING HOLES, body_width: 0.190 INCHES NOMINAL IN, body_height: 0.500 INCHES NOMINAL IN, body_length: 0.527 INCHES MINIMUM AND 0.533 INCHES MAXIMUM IN, shaft_style: ROUND, SLOTTED, shaft_length: 0.030 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-165-1353, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 5351-072
NSN: 5340-00-165-1353
FSC: 5340
CAGE: 24930 — L3HARRIS TECHNOLOGIES, INC DIV SPACE & AIRBORNE SYSTEMS (USA)
SPECIFICATIONS
body_styleRECTANGULAR W/MOUNTING HOLES
body_width0.190 INCHES NOMINAL IN
body_height0.500 INCHES NOMINAL IN
body_length0.527 INCHES MINIMUM AND 0.533 INCHES MAXIMUM IN
shaft_styleROUND, SLOTTED
shaft_length0.030 INCHES NOMINAL IN
actuator_typeSINGLE SHAFT
overall_width0.190 INCHES NOMINAL IN
overall_height0.500 INCHES NOMINAL IN
overall_length0.728 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN
shaft_diameter0.083 INCHES NOMINAL IN
mounting_methodUNTHREADED HOLE(S)
NSN5340-00-165-1353
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5351-072 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
5151-8Interchangeable
interchangeable cross-reference
interchangeable
025-002824Interchangeable
interchangeable cross-reference
interchangeable
5151-008Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5351-072?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5351-072?
5351-072 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace 5351-072?
There are 3 known substitutes for 5351-072: 5151-8, 025-002824, 5151-008. Substitute compatibility should be verified for your specific system.
What is the NSN for 5351-072?
5351-072 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-165-1353. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5351-072

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026