PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 535035
535035 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL BAND, slot_width: 0.281 INCHES NOMINAL IN, slot_length: 0.375 INCHES NOMINAL IN, overall_width: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN, style_designator: SINGLE LOOP, tongue_hole_type: OBLONG. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-741-1003, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
535035
NSN: 5340-00-741-1003
FSC: 5340
CAGE: 23705 — FRUEHAUF CORP (USA)
SPECIFICATIONS
materialSTEEL BAND
slot_width0.281 INCHES NOMINAL IN
slot_length0.375 INCHES NOMINAL IN
overall_width0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
style_designatorSINGLE LOOP
tongue_hole_typeOBLONG
material_thickness0.026 INCHES NOMINAL IN
loop_inside_diameter0.282 INCHES MINIMUM AND 0.344 INCHES MAXIMUM IN
material_document_and_classificationQQ-S-636,COND 4 OR 5,CR FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end0.766 INCHES MINIMUM AND 0.828 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
NSN5340-00-741-1003
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 535035 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.026 INCHES NOMINAL IN
•
SLOT WIDTH: 0.281 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
•
LOOP INSIDE DIAMETER: 0.282 INCHES MINIMUM AND 0.344 INCHES MAXIMUM IN
•
MATERIAL: STEEL BAND
•
TONGUE HOLE TYPE: OBLONG
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.766 INCHES MINIMUM AND 0.828 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.026 INCHES NOMINAL IN
SLOT WIDTH0.281 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
LOOP INSIDE DIAMETER0.282 INCHES MINIMUM AND 0.344 INCHES MAXIMUM IN
OVERALL WIDTH0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
MATERIALSTEEL BAND
TONGUE HOLE TYPEOBLONG
DISTANCE FROM LOOP CENTER TO TONGUE END0.766 INCHES MINIMUM AND 0.828 INCHES MAXIMUM IN
SLOT LENGTH0.375 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-636,COND 4 OR 5,CR FED SPEC SINGLE MATERIAL RESPONSE BAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
711469-2Interchangeable
interchangeable cross-reference
interchangeable
7411-003Interchangeable
interchangeable cross-reference
interchangeable
7411-001Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 535035?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 535035?
535035 is a CLAMP,LOOP.
What parts can replace 535035?
There are 3 known substitutes for 535035: 711469-2, 7411-003, 7411-001. Substitute compatibility should be verified for your specific system.
What is the NSN for 535035?
535035 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-741-1003. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 535035

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026