PartsTable
Technical Data Sheet
Download PDF

534868-1 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

534868-1: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN, length: 1.015 INCHES MINIMUM AND 1.035 INCHES MAXIMUM IN, material: COPPER ALLOY 172 OVERALL, overall_height: 1.180 INCHES MINIMUM AND 1.200 INCHES MAXIMUM IN, surface_treatment: CADMIUM AND CHROMATE OVERALL, material_thickness: 0.031 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-174-4787, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
534868-1
NSN: 5340-00-174-4787
FSC: 5340 — Hardware, Commercial
CAGE: 96214 — RAYTHEON COMPANY DBA RAYTHEON (USA)
SPECIFICATIONS
width0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
length1.015 INCHES MINIMUM AND 1.035 INCHES MAXIMUM IN
materialCOPPER ALLOY 172 OVERALL
overall_height1.180 INCHES MINIMUM AND 1.200 INCHES MAXIMUM IN
surface_treatmentCADMIUM AND CHROMATE OVERALL
material_thickness0.031 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
loop/holding_dimension0.995 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
distance_from_loop_center_to_end0.745 INCHES NOMINAL IN
material_document_and_classificationQQ-C-533,ALLOY 172 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-00-174-4787
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 534868-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 1.015 INCHES MINIMUM AND 1.035 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-533,ALLOY 172 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
LOOP/HOLDING DIMENSION: 0.995 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.031 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO END: 0.745 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.180 INCHES MINIMUM AND 1.200 INCHES MAXIMUM IN
LENGTH1.015 INCHES MINIMUM AND 1.035 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-533,ALLOY 172 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
LOOP/HOLDING DIMENSION0.995 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
MATERIAL THICKNESS0.031 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO END0.745 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
WIDTH0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
MATERIALCOPPER ALLOY 172 OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
6020-58CCReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 534868-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 534868-1?
534868-1 is a CLIP,SPRING TENSION.
What parts can replace 534868-1?
There is 1 known substitute for 534868-1: 6020-58CC. Substitute compatibility should be verified for your specific system.
What is the NSN for 534868-1?
534868-1 is cataloged in the U.S. Government catalog under NSN 5340-00-174-4787. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 534868-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.