PartsTable
Technical Data Sheet
53460 ✓ Verified by PartsTable
Jumbo · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

First puzzle for your baby! A wooden puzzle for the smallest children of cats. Very practical, with pieces tied with a string so that they don’t get lost. Key specifications include material: STEEL OVERALL, overall_length: 3.250 INCHES NOMINAL IN, first_end_style: SQUARE, overall_diameter: 1.275 INCHES NOMINAL IN, special_features: AFBMA STANDARD TOLERANCE FOR BALLS,GRADE 24, style_designator: BALL.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-6159, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
53460
NSN: 3110-00-100-6159
FSC: 3110
CAGE: 95879 — STEWART-WARNER ALEMITE CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
overall_length3.250 INCHES NOMINAL IN
first_end_styleSQUARE
overall_diameter1.275 INCHES NOMINAL IN
special_featuresAFBMA STANDARD TOLERANCE FOR BALLS,GRADE 24
style_designatorBALL
pin_overall_length1.080 INCHES NOMINAL IN
contact_arrangementSINGLE POLE, SINGLE THROW, NORMALLY CLOSED
pin_overall_diameter0.1575 INCHES MINIMUM AND 0.1585 INCHES MAXIMUM IN
delay_time_in_seconds2.0 FIXED OPERATE NOMINAL
end_item_identificationT-2C AIRCRAFT
environmental_protectionHERMETIC
NSN3110-00-100-6159
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 53460 · Jumbo ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
ROLLING ELEMENT DIAMETER: 0.5625 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
STYLE DESIGNATOR: BALL
MATERIAL: STEEL COMP E51100 OR STEEL COMP E52100 OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESAFBMA STANDARD TOLERANCE FOR BALLS,GRADE 24
ROLLING ELEMENT DIAMETER0.5625 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
STYLE DESIGNATORBALL
MATERIALSTEEL COMP E51100 OR STEEL COMP E52100 OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
13306-9Interchangeable
interchangeable cross-reference
interchangeable
A13306Interchangeable
interchangeable cross-reference
interchangeable
53460Interchangeable
interchangeable cross-reference
interchangeable
B1947Interchangeable
interchangeable cross-reference
interchangeable
P48S28-50Interchangeable
interchangeable cross-reference
interchangeable
H30-50Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 53460?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 53460?
53460 is a CONNECTOR,PLUG,ELECTRICAL manufactured by Jumbo.
What parts can replace 53460?
There are 26 known substitutes for 53460: 13306-9, A13306, 53460 and 23 more. Substitute compatibility should be verified for your specific system.
Is 53460 still available?
53460 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 53460