PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5342PL0965830
5342PL0965830 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: STEEL COMP 4130 BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: CADMIUM BAND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-598-8239, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5342PL0965830
NSN: 5340-00-598-8239
FSC: 5340
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
diameter0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
materialSTEEL COMP 4130 BAND
overall_width0.500 INCHES NOMINAL IN
style_designatorOFFSET MOUNT
tongue_hole_typeROUND, UNTHREADED
surface_treatmentCADMIUM BAND
material_thickness0.064 INCHES NOMINAL IN
loop_inside_diameter1.250 INCHES NOMINAL IN
material_document_and_classificationAMS 6350 ASSN STD SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end1.338 INCHES MINIMUM AND 1.348 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole1.125 INCHES NOMINAL IN
NSN5340-00-598-8239
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5342PL0965830 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL COMP 4130 BAND
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
LOOP INSIDE DIAMETER: 1.250 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.064 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.125 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.338 INCHES MINIMUM AND 1.348 INCHES MAXIMUM IN
•
DIAMETER: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL COMP 4130 BAND
MATERIALRUBBER SYNTHETIC CUSHION
TONGUE HOLE TYPEROUND, UNTHREADED
LOOP INSIDE DIAMETER1.250 INCHES NOMINAL IN
MATERIAL THICKNESS0.064 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.125 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.338 INCHES MINIMUM AND 1.348 INCHES MAXIMUM IN
DIAMETER0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6350 ASSN STD SINGLE MATERIAL RESPONSE BAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
229804Interchangeable
interchangeable cross-reference
interchangeable
350399Interchangeable
interchangeable cross-reference
interchangeable
32116Interchangeable
interchangeable cross-reference
interchangeable
MS9024-04Interchangeable
interchangeable cross-reference
interchangeable
NAS1715C5NInterchangeable
interchangeable cross-reference
interchangeable
MS9024Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5342PL0965830?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5342PL0965830?
5342PL0965830 is a CLAMP,LOOP.
What parts can replace 5342PL0965830?
There are 22 known substitutes for 5342PL0965830: 229804, 350399, 32116 and 19 more. Substitute compatibility should be verified for your specific system.
Is 5342PL0965830 still available?
5342PL0965830 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5342PL0965830

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026