PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5342013740501
5342013740501 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The MOUNT,RESILIENT,UTILITY is a the manufacturer industrial component. Key specifications include height: 1.810 INCHES NOMINAL IN, thread_size: 12-1.75 ALL THREADED PORTIONS, flange_width: 2.770 INCHES NOMINAL IN, flange_length: 4.750 INCHES NOMINAL IN, flange_thickness: 0.380 INCHES NOMINAL IN, special_features: STYLE DESIGNATOR 84 SQUARE W/THREADED STUD TWO-HOLE FLANGE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-374-0501, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5342013740501
NSN: 5340-01-374-0501
FSC: 5340
CAGE: A00AM — E.C.A ETABLISSEMENT CENTRAL DES APPROVISIONNEMENTS DES FORCES ARMEES ROYALES
SPECIFICATIONS
height1.810 INCHES NOMINAL IN
thread_size12-1.75 ALL THREADED PORTIONS
flange_width2.770 INCHES NOMINAL IN
flange_length4.750 INCHES NOMINAL IN
flange_thickness0.380 INCHES NOMINAL IN
special_featuresSTYLE DESIGNATOR 84 SQUARE W/THREADED STUD TWO-HOLE FLANGE
style_designatorSQUARE W/THREADED STUD TWO-HOLE FLANGE
end_item_identificationMRAP - COMMON NSN - USED ON 3 MRAP VARIANTS AND 1 OTHER WEAPON SYSTEM; HIGH-MOBILITY ARTILLERY ROCKET SYSTEM (HIMARS)
flange_mounting_hole_diameter0.335 INCHES NOMINAL IN
distance_between_mounting_hole_centers3.750 INCHES NOMINAL IN
NSN5340-01-374-0501
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5342013740501 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE LENGTH: 4.750 INCHES NOMINAL IN
•
HEIGHT: 1.810 INCHES NOMINAL IN
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 3.750 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SQUARE W/THREADED STUD TWO-HOLE FLANGE
•
FLANGE MOUNTING HOLE DIAMETER: 0.335 INCHES NOMINAL IN
•
FLANGE WIDTH: 2.770 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
FLANGE LENGTH4.750 INCHES NOMINAL IN
HEIGHT1.810 INCHES NOMINAL IN
SPECIAL FEATURESSTYLE DESIGNATOR 84 SQUARE W/THREADED STUD TWO-HOLE FLANGE
DISTANCE BETWEEN MOUNTING HOLE CENTERS3.750 INCHES NOMINAL IN
STYLE DESIGNATORSQUARE W/THREADED STUD TWO-HOLE FLANGE
END ITEM IDENTIFICATIONMRAP - COMMON NSN - USED ON 3 MRAP VARIANTS AND 1 OTHER WEAPON SYSTEM; HIGH-MOBILITY ARTILLERY ROCKET SYSTEM (HIMARS)
FLANGE MOUNTING HOLE DIAMETER0.335 INCHES NOMINAL IN
FLANGE WIDTH2.770 INCHES NOMINAL IN
THREAD SIZE12-1.75 ALL THREADED PORTIONS
FLANGE THICKNESS0.380 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
25923Interchangeable
interchangeable cross-reference
interchangeable
33471Interchangeable
interchangeable cross-reference
interchangeable
25923DInterchangeable
interchangeable cross-reference
interchangeable
14-25923Interchangeable
interchangeable cross-reference
interchangeable
6211CE1TX9Interchangeable
interchangeable cross-reference
interchangeable
00213-0206Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5342013740501?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5342013740501?
5342013740501 is a MOUNT,RESILIENT,UTILITY.
What parts can replace 5342013740501?
There are 15 known substitutes for 5342013740501: 25923, 33471, 25923D and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5342013740501?
5342013740501 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-374-0501. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5342013740501

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026