PartsTable
Technical Data Sheet
Download PDF

5340PL2221695 — HINGE,BUTT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5340PL2221695: HINGE,BUTT.

The HINGE,BUTT is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, rising_pin: NOT INCLUDED, knuckle_type: FRICTION, pin_diameter: 0.250 INCHES NOMINAL IN, overall_length: 2.500 INCHES NOMINAL IN, performance_type: NOT RATED. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-114-0132, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5340PL2221695
NSN: 5340-01-114-0132
FSC: 5340 — Hardware, Commercial
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialUNABLE TO DECODE
rising_pinNOT INCLUDED
knuckle_typeFRICTION
pin_diameter0.250 INCHES NOMINAL IN
overall_length2.500 INCHES NOMINAL IN
knuckle_quantity2
performance_typeNOT RATED
pin_removabilityNONREMOVABLE
style_designatorBUTT
surface_treatmentUNABLE TO DECODE
material_thickness0.048 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
reversible_featureNOT INCLUDED
NSN5340-01-114-0132
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5340PL2221695 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PIN DIAMETER: 0.250 INCHES NOMINAL IN
•
REVERSIBLE FEATURE: NOT INCLUDED
•
STYLE DESIGNATOR: BUTT
•
PIN CENTER TO BODY EDGE DISTANCE: 1.000 INCHES NOMINAL IN
•
HINGE MOUNTING TYPE: FULL SURFACE
•
MATERIAL THICKNESS: 0.048 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
•
PIN REMOVABILITY: NONREMOVABLE
TECHNICAL CHARACTERISTICS
PIN DIAMETER0.250 INCHES NOMINAL IN
REVERSIBLE FEATURENOT INCLUDED
STYLE DESIGNATORBUTT
OVERALL LENGTH2.500 INCHES NOMINAL IN
PIN CENTER TO BODY EDGE DISTANCE1.000 INCHES NOMINAL IN
HINGE MOUNTING TYPEFULL SURFACE
MATERIAL THICKNESS0.048 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
PIN REMOVABILITYNONREMOVABLE
KNUCKLE QUANTITY2
SURFACE TREATMENTUNABLE TO DECODE
SUBSTITUTES & CROSS-REFERENCES 3
H1004DINRReference document
Same NSN cross-reference
Reference document — Secondary reference
H1004D1NRReference document
Same NSN cross-reference
Reference document — Secondary reference
96-04-D1NRReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 5340PL2221695?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5340PL2221695?
5340PL2221695 is a HINGE,BUTT.
What parts can replace 5340PL2221695?
There are 3 known substitutes for 5340PL2221695: H1004DINR, H1004D1NR, 96-04-D1NR. Substitute compatibility should be verified for your specific system.
What is the NSN for 5340PL2221695?
5340PL2221695 is cataloged in the U.S. Government catalog under NSN 5340-01-114-0132. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5340PL2221695

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.