5340PL2214277 — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

5340PL2214277: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: STEEL COMP 302 OR STEEL COMP 321 BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, surface_treatment: PASSIVATE BAND, material_thickness: 0.032 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-103-2945, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

5340PL2214277

NSN: 5340-00-103-2945
FSC: 5340 — Hardware, Commercial
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)

SPECIFICATIONS

diameter	0.204 INCHES NOMINAL IN
material	STEEL COMP 302 OR STEEL COMP 321 BAND
overall_width	0.500 INCHES NOMINAL IN
style_designator	SINGLE LOOP
surface_treatment	PASSIVATE BAND
material_thickness	0.032 INCHES NOMINAL IN
loop_inside_diameter	0.250 INCHES NOMINAL IN
cushioning_environmental_protection	FUEL, AROMATIC
material_document_and_classification	AMS 3651 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
distance_from_loop_center_to_tongue_end	0.717 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole	0.529 INCHES NOMINAL IN
NSN	5340-00-103-2945

COMPONENT DIAGRAM

KEY FEATURES

•

CUSHIONING ENVIRONMENTAL PROTECTION: FUEL, AROMATIC

•

STYLE DESIGNATOR: SINGLE LOOP

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3651 ASSN STD SINGLE MATERIAL RESPONSE CUSHION

•

DIAMETER: 0.204 INCHES NOMINAL IN

•

MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 0.717 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

CUSHIONING ENVIRONMENTAL PROTECTION	FUEL, AROMATIC
STYLE DESIGNATOR	SINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 3651 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE OR AMS 5510 ASSN STD 2ND MATERIAL RESPONSE BAND
DIAMETER	0.204 INCHES NOMINAL IN
OVERALL WIDTH	0.500 INCHES NOMINAL IN
MATERIAL THICKNESS	0.032 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END	0.717 INCHES NOMINAL IN
SURFACE TREATMENT	PASSIVATE BAND
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	0.529 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 9

AS21919Reference document

Same NSN cross-reference

Reference document — Secondary reference

TA1718SS4TReference document

Same NSN cross-reference

Reference document — Secondary reference

SAE-AS21919Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

361-2-4Reference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

MS21919WCJ4Reference document

Same NSN cross-reference

Reference document — Secondary reference

MS21919CJ4Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

No demilitarization required

Ready to buy 5340PL2214277?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 5340PL2214277?

5340PL2214277 is a CLAMP,LOOP.

What parts can replace 5340PL2214277?

There are 9 known substitutes for 5340PL2214277: AS21919, TA1718SS4T, SAE-AS21919 and 6 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 5340PL2214277?

5340PL2214277 is cataloged in the U.S. Government catalog under NSN 5340-00-103-2945. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

5340PL2214277 — CLAMP,LOOP

Request a Quote — 5340PL2214277