PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5340PL2206826
5340PL2206826 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAP-PLUG,PROTECTIVE,DUST AND MOI. Key specifications include material: PLASTIC, POLYETHYLENE (PP), length_under_shoulder: 0.880 INCHES NOMINAL IN, open_end_inside_diameter: 0.750 INCHES NOMINAL IN, closed_end_overall_diameter: 0.900 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-334-5089, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5340PL2206826
NSN: 5340-01-334-5089
FSC: 5340
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialPLASTIC, POLYETHYLENE (PP)
length_under_shoulder0.880 INCHES NOMINAL IN
open_end_inside_diameter0.750 INCHES NOMINAL IN
closed_end_overall_diameter0.900 INCHES NOMINAL IN
NSN5340-01-334-5089
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5340PL2206826 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH UNDER SHOULDER: 0.880 INCHES NOMINAL IN
•
MATERIAL: PLASTIC, POLYETHYLENE (PP)
•
OPEN END INSIDE DIAMETER: 0.750 INCHES NOMINAL IN
•
CLOSED END OVERALL DIAMETER: 0.900 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
LENGTH UNDER SHOULDER0.880 INCHES NOMINAL IN
MATERIALPLASTIC, POLYETHYLENE (PP)
OPEN END INSIDE DIAMETER0.750 INCHES NOMINAL IN
CLOSED END OVERALL DIAMETER0.900 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
RC-12-S7AInterchangeable
interchangeable cross-reference
interchangeable
442000Interchangeable
interchangeable cross-reference
interchangeable
697517Interchangeable
interchangeable cross-reference
interchangeable
SW24054Interchangeable
interchangeable cross-reference
interchangeable
RC12Interchangeable
interchangeable cross-reference
interchangeable
850994Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5340PL2206826?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5340PL2206826?
5340PL2206826 is a CAP-PLUG,PROTECTIVE,DUST AND MOI.
What parts can replace 5340PL2206826?
There are 9 known substitutes for 5340PL2206826: RC-12-S7A, 442000, 697517 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5340PL2206826?
5340PL2206826 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-334-5089. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5340PL2206826

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026