PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5340PL1879051
5340PL1879051 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

PLUG,PROTECTIVE,DUST AND MOISTUR. Key specifications include material: PLASTIC, drive_type: SCREW SLOT OR SERRATED, design_type: THREADED, overall_diameter: 0.375 INCHES NOMINAL IN, end_item_identification: MRAP BUFFALO MK2A2, thread_size_and_series/type_designator: 3/8-18 NPT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-200-8637, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5340PL1879051
NSN: 5340-00-200-8637
FSC: 5340
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialPLASTIC
drive_typeSCREW SLOT OR SERRATED
design_typeTHREADED
overall_diameter0.375 INCHES NOMINAL IN
end_item_identificationMRAP BUFFALO MK2A2
thread_size_and_series/type_designator3/8-18 NPT
NSN5340-00-200-8637
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5340PL1879051 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SIZE AND SERIES/TYPE DESIGNATOR: 3/8-18 NPT
•
DESIGN TYPE: THREADED
•
MATERIAL: PLASTIC
•
DRIVE TYPE: SCREW SLOT OR SERRATED
•
OVERALL DIAMETER: 0.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
END ITEM IDENTIFICATIONMRAP BUFFALO MK2A2
THREAD SIZE AND SERIES/TYPE DESIGNATOR3/8-18 NPT
DESIGN TYPETHREADED
MATERIALPLASTIC
DRIVE TYPESCREW SLOT OR SERRATED
OVERALL DIAMETER0.375 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
P42Upgraded Successor
successor cross-reference
successor
7HA953Interchangeable
interchangeable cross-reference
interchangeable
10-44Interchangeable
interchangeable cross-reference
interchangeable
353274Interchangeable
interchangeable cross-reference
interchangeable
10-269Interchangeable
interchangeable cross-reference
interchangeable
61560Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5340PL1879051?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5340PL1879051?
5340PL1879051 is a PLUG,PROTECTIVE,DUST AND MOISTUR.
What parts can replace 5340PL1879051?
There are 24 known substitutes for 5340PL1879051: P42, 7HA953, 10-44 and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5340PL1879051?
5340PL1879051 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-200-8637. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5340PL1879051

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026