PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5340PL1803422
5340PL1803422 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PLUG ASSEMBLY,SEALING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 416, overall_diameter: 0.155 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN, special_features: 0.238 IN. MIN 0.252 IN.

MAX O/A LG, 0.118 IN. DIA LARGE END TAPERED PIN IN, material_document_and_classification: ASTM A582, TYPE 416 ASSN STD SINGLE MATERIAL RESPONSE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-868-7173, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5340PL1803422
NSN: 5340-00-868-7173
FSC: 5340
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialSTEEL COMP 416
overall_diameter0.155 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN
special_features0.238 IN. MIN 0.252 IN. MAX O/A LG, 0.118 IN. DIA LARGE END TAPERED PIN IN
material_document_and_classificationASTM A582, TYPE 416 ASSN STD SINGLE MATERIAL RESPONSE
NSN5340-00-868-7173
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5340PL1803422 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582, TYPE 416 ASSN STD SINGLE MATERIAL RESPONSE
•
OVERALL DIAMETER: 0.155 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 416
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURES0.238 IN. MIN 0.252 IN. MAX O/A LG, 0.118 IN. DIA LARGE END TAPERED PIN IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A582, TYPE 416 ASSN STD SINGLE MATERIAL RESPONSE
OVERALL DIAMETER0.155 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN
MATERIALSTEEL COMP 416
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
17246Interchangeable
interchangeable cross-reference
interchangeable
EC150Interchangeable
interchangeable cross-reference
interchangeable
5234Interchangeable
interchangeable cross-reference
interchangeable
4730PL0719663Interchangeable
interchangeable cross-reference
interchangeable
AS18280Interchangeable
interchangeable cross-reference
interchangeable
MS21916-6-4CInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5340PL1803422?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5340PL1803422?
5340PL1803422 is a PLUG ASSEMBLY,SEALING.
What parts can replace 5340PL1803422?
There are 19 known substitutes for 5340PL1803422: 17246, EC150, 5234 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5340PL1803422?
5340PL1803422 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-868-7173. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5340PL1803422

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026