PartsTable
Technical Data Sheet
Download PDF

5340PL1731404 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5340PL1731404: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL COMP 301 OVERALL, overall_width: 1.250 INCHES NOMINAL IN, style_designator: T-BOLT, material_thickness: 0.025 INCHES NOMINAL IN, loop_inside_diameter: 8.340 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-047-4338, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5340PL1731404
NSN: 5340-01-047-4338
FSC: 5340 — Hardware, Commercial
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialSTEEL COMP 301 OVERALL
overall_width1.250 INCHES NOMINAL IN
style_designatorT-BOLT
material_thickness0.025 INCHES NOMINAL IN
loop_inside_diameter8.340 INCHES NOMINAL IN
NSN5340-01-047-4338
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5340PL1731404 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: T-BOLT
•
MATERIAL THICKNESS: 0.025 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 301 OVERALL
•
LOOP INSIDE DIAMETER: 8.340 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORT-BOLT
OVERALL WIDTH1.250 INCHES NOMINAL IN
MATERIAL THICKNESS0.025 INCHES NOMINAL IN
MATERIALSTEEL COMP 301 OVERALL
LOOP INSIDE DIAMETER8.340 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
5340PL0846521Reference document
Same NSN cross-reference
Reference document — Informative reference only
C7965S834Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 5340PL1731404?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5340PL1731404?
5340PL1731404 is a CLAMP,LOOP.
What parts can replace 5340PL1731404?
There are 2 known substitutes for 5340PL1731404: 5340PL0846521, C7965S834. Substitute compatibility should be verified for your specific system.
What is the NSN for 5340PL1731404?
5340PL1731404 is cataloged in the U.S. Government catalog under NSN 5340-01-047-4338. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5340PL1731404