PartsTable
Technical Data Sheet
Download PDF

5340PL1683084 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5340PL1683084: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.201 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: ALUMINUM ALLOY 2024 BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: ANODIZE BAND. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-005-0782, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5340PL1683084
NSN: 5340-01-005-0782
FSC: 5340 — Hardware, Commercial
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
diameter0.201 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
materialALUMINUM ALLOY 2024 BAND
overall_width0.500 INCHES NOMINAL IN
style_designatorOFFSET MOUNT
tongue_hole_typeROUND, UNTHREADED
surface_treatmentANODIZE BAND
material_thickness0.047 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN
loop_inside_diameter0.798 INCHES MINIMUM AND 0.828 INCHES MAXIMUM IN
cushioning_environmental_protectionHEAT AND WEATHER RESISTANT
material_document_and_classificationQQ-A-25015 T4 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end1.021 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.803 INCHES NOMINAL IN
NSN5340-01-005-0782
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5340PL1683084 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CUSHIONING ENVIRONMENTAL PROTECTION: HEAT AND WEATHER RESISTANT
•
STYLE DESIGNATOR: OFFSET MOUNT
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-25015 T4 FED SPEC SINGLE MATERIAL RESPONSE BAND
•
DIAMETER: 0.201 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.047 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.021 INCHES NOMINAL IN
•
SURFACE TREATMENT: ANODIZE BAND
TECHNICAL CHARACTERISTICS
CUSHIONING ENVIRONMENTAL PROTECTIONHEAT AND WEATHER RESISTANT
STYLE DESIGNATOROFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-25015 T4 FED SPEC SINGLE MATERIAL RESPONSE BAND
DIAMETER0.201 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.047 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.021 INCHES NOMINAL IN
SURFACE TREATMENTANODIZE BAND
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.803 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 4
5340PL0846459Reference document
Same NSN cross-reference
Reference document — Informative reference only
TA11C44D13TSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
S280D13Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
C2874D13Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 5340PL1683084?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5340PL1683084?
5340PL1683084 is a CLAMP,LOOP.
What parts can replace 5340PL1683084?
There are 4 known substitutes for 5340PL1683084: 5340PL0846459, TA11C44D13T, S280D13 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5340PL1683084?
5340PL1683084 is cataloged in the U.S. Government catalog under NSN 5340-01-005-0782. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5340PL1683084

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.