PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5340PL1668215
5340PL1668215 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: ALUMINUM BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, material_thickness: 0.032 INCHES NOMINAL IN, loop_inside_diameter: 0.313 INCHES NOMINAL IN, distance_from_loop_center_to_tongue_end: 0.778 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-585-8951, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5340PL1668215
NSN: 5340-01-585-8951
FSC: 5340
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialALUMINUM BAND
overall_width0.500 INCHES NOMINAL IN
style_designatorOFFSET MOUNT
material_thickness0.032 INCHES NOMINAL IN
loop_inside_diameter0.313 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end0.778 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.560 INCHES NOMINAL IN
NSN5340-01-585-8951
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5340PL1668215 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.778 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 0.313 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM BAND
•
STYLE DESIGNATOR: OFFSET MOUNT
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.560 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
DISTANCE FROM LOOP CENTER TO TONGUE END0.778 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.313 INCHES NOMINAL IN
MATERIALALUMINUM BAND
MATERIALRUBBER CHLOROPRENE CLASS CR CUSHION
STYLE DESIGNATOROFFSET MOUNT
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.560 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
3696440190Upgraded Successor
successor cross-reference
successor
5340PL1691020Upgraded Successor
successor cross-reference
successor
JM44LC33WD5Upgraded Successor
successor cross-reference
successor
MIL-DTL-8603Upgraded Successor
successor cross-reference
successor
TA1716WS4Upgraded Successor
successor cross-reference
successor
MS21919WG4Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5340PL1668215?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5340PL1668215?
5340PL1668215 is a CLAMP,LOOP.
What parts can replace 5340PL1668215?
There are 25 known substitutes for 5340PL1668215: 3696440190, 5340PL1691020, JM44LC33WD5 and 22 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5340PL1668215?
5340PL1668215 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-585-8951. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5340PL1668215

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026