PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5340PL1667994
5340PL1667994 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: RUBBER CHLOROPRENE CLASS CR CUSHION, overall_width: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: CHROMATE BAND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-291-5322, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5340PL1667994
NSN: 5340-00-291-5322
FSC: 5340
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialRUBBER CHLOROPRENE CLASS CR CUSHION
overall_width0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
style_designatorOFFSET MOUNT
tongue_hole_typeROUND, UNTHREADED
surface_treatmentCHROMATE BAND
material_thickness0.032 INCHES NOMINAL IN
loop_inside_diameter0.173 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN
end_item_identificationARMORED MULTI-PURPOSE VEHICLE (AMPV); MULTIPLE LAUNCH ROCKET SYSTEM
nondefinitive_spec/std_data4 TYPE AND A CLASS
cushioning_environmental_protectionWEATHER RESISTANT
material_document_and_classificationQQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND
NSN5340-00-291-5322
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5340PL1667994 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CUSHIONING ENVIRONMENTAL PROTECTION: WEATHER RESISTANT
•
SURFACE TREATMENT: CHROMATE BAND
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.483 INCHES MINIMUM AND 0.513 INCHES MAXIMUM IN
•
LOOP INSIDE DIAMETER: 0.173 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.716 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
TECHNICAL CHARACTERISTICS (FLIS)
CUSHIONING ENVIRONMENTAL PROTECTIONWEATHER RESISTANT
OVERALL WIDTH0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
SURFACE TREATMENTCHROMATE BAND
END ITEM IDENTIFICATIONARMORED MULTI-PURPOSE VEHICLE (AMPV); MULTIPLE LAUNCH ROCKET SYSTEM
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.483 INCHES MINIMUM AND 0.513 INCHES MAXIMUM IN
LOOP INSIDE DIAMETER0.173 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.716 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
DIAMETER0.204 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 3209 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
MIL-DTL-8603Upgraded Successor
successor cross-reference
successor
TA1716WS4Upgraded Successor
successor cross-reference
successor
MS21919WG4Upgraded Successor
successor cross-reference
successor
8036Upgraded Successor
successor cross-reference
successor
K8036Upgraded Successor
successor cross-reference
successor
10335339Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5340PL1667994?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5340PL1667994?
5340PL1667994 is a CLAMP,LOOP.
What parts can replace 5340PL1667994?
There are 26 known substitutes for 5340PL1667994: MIL-DTL-8603, TA1716WS4, MS21919WG4 and 23 more. Substitute compatibility should be verified for your specific system.
Is 5340PL1667994 still available?
5340PL1667994 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5340PL1667994

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026