Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 321, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: END RADIUS, first_leg_width: 0.500 INCHES NOMINAL IN, first_leg_length: 0.633 INCHES MINIMUM AND 0.643 INCHES MAXIMUM IN, second_leg_style: END RADIUS. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-151-5901, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
5340PL1559895
NSN:5340-00-151-5901 FSC:5340 CAGE:9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
material
STEEL COMP 321
first_leg_angle
90.0 DEGREES NOMINAL
first_leg_style
END RADIUS
first_leg_width
0.500 INCHES NOMINAL IN
first_leg_length
0.633 INCHES MINIMUM AND 0.643 INCHES MAXIMUM IN
second_leg_style
END RADIUS
second_leg_width
0.500 INCHES NOMINAL IN
style_designator
ANGLE
second_leg_length
0.945 INCHES MINIMUM AND 0.955 INCHES MAXIMUM IN
first_leg_thickness
0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
first_leg_end_radius
0.500 INCHES NOMINAL IN
second_leg_thickness
0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
NSN
5340-00-151-5901
COMPONENT DIAGRAM
KEY FEATURES
•
SECOND LEG END RADIUS: 0.500 INCHES NOMINAL IN
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
•
FIRST LEG WIDTH: 0.500 INCHES NOMINAL IN
•
SECOND LEG HOLE ARRANGEMENT STYLE: ONE HOLE
•
FIRST LEG STYLE: END RADIUS
•
SECOND LEG HOLE DIAMETER: 0.200 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
•
SECOND LEG THICKNESS: 0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
SECOND LEG END RADIUS
0.500 INCHES NOMINAL IN
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5340PL1559895?
5340PL1559895 is a BRACKET,ANGLE.
What parts can replace 5340PL1559895?
There are 10 known substitutes for 5340PL1559895: MS9592-009, SAE-AS9592, MS9592-138 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5340PL1559895?
5340PL1559895 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-151-5901. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.