PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5340PL0955051
5340PL0955051 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYAMIDE NYLON OVERALL, overall_width: 0.380 INCHES NOMINAL IN, style_designator: SINGLE LOOP, material_thickness: 0.045 INCHES NOMINAL IN, loop_inside_diameter: 0.173 INCHES NOMINAL IN, material_document_and_classification: L-P-410 FED SPEC SINGLE MATERIAL RESPONSE OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-164-3480, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5340PL0955051
NSN: 5340-01-164-3480
FSC: 5340
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialPLASTIC POLYAMIDE NYLON OVERALL
overall_width0.380 INCHES NOMINAL IN
style_designatorSINGLE LOOP
material_thickness0.045 INCHES NOMINAL IN
loop_inside_diameter0.173 INCHES NOMINAL IN
material_document_and_classificationL-P-410 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
distance_from_loop_center_to_tongue_end0.710 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.520 INCHES NOMINAL IN
NSN5340-01-164-3480
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5340PL0955051 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.520 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL: PLASTIC POLYAMIDE NYLON OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: L-P-410 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
LOOP INSIDE DIAMETER: 0.173 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.045 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.710 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.520 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
MATERIALPLASTIC POLYAMIDE NYLON OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONL-P-410 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
LOOP INSIDE DIAMETER0.173 INCHES NOMINAL IN
MATERIAL THICKNESS0.045 INCHES NOMINAL IN
OVERALL WIDTH0.380 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.710 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
PP5Upgraded Successor
successor cross-reference
successor
1819320-005Upgraded Successor
successor cross-reference
successor
4010650-0707Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5340PL0955051?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5340PL0955051?
5340PL0955051 is a CLAMP,LOOP.
What parts can replace 5340PL0955051?
There are 3 known substitutes for 5340PL0955051: PP5, 1819320-005, 4010650-0707. Substitute compatibility should be verified for your specific system.
What is the NSN for 5340PL0955051?
5340PL0955051 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-164-3480. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5340PL0955051

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026