5340PL0926712 — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

5340PL0926712: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: STEEL COMP 321 BAND, overall_width: 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-597-9386, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

5340PL0926712

NSN: 5340-00-597-9386
FSC: 5340 — Hardware, Commercial
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)

SPECIFICATIONS

diameter	0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
material	STEEL COMP 321 BAND
overall_width	0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
style_designator	SINGLE LOOP
tongue_hole_type	ROUND, UNTHREADED
material_thickness	0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
loop_inside_diameter	0.312 INCHES NOMINAL IN
material_document_and_classification	AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end	0.706 INCHES MINIMUM AND 0.726 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole	0.493 INCHES MINIMUM AND 0.503 INCHES MAXIMUM IN
NSN	5340-00-597-9386

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: SINGLE LOOP

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND

•

DIAMETER: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN

•

MATERIAL THICKNESS: 0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 0.706 INCHES MINIMUM AND 0.726 INCHES MAXIMUM IN

•

TONGUE HOLE TYPE: ROUND, UNTHREADED

•

CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.493 INCHES MINIMUM AND 0.503 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	SINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND
DIAMETER	0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
OVERALL WIDTH	0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
MATERIAL THICKNESS	0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END	0.706 INCHES MINIMUM AND 0.726 INCHES MAXIMUM IN
TONGUE HOLE TYPE	ROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	0.493 INCHES MINIMUM AND 0.503 INCHES MAXIMUM IN
MATERIAL	STEEL COMP 321 BAND
LOOP INSIDE DIAMETER	0.312 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 3

SAE AS122900 THRU AS122939Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

10-90203-5Reference document

Same NSN cross-reference

Reference document — Secondary reference

MS122903Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

No demilitarization required

Ready to buy 5340PL0926712?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 5340PL0926712?

5340PL0926712 is a CLAMP,LOOP.

What parts can replace 5340PL0926712?

There are 3 known substitutes for 5340PL0926712: SAE AS122900 THRU AS122939, 10-90203-5, MS122903. Substitute compatibility should be verified for your specific system.

What is the NSN for 5340PL0926712?

5340PL0926712 is cataloged in the U.S. Government catalog under NSN 5340-00-597-9386. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

5340PL0926712 — CLAMP,LOOP

Request a Quote — 5340PL0926712