PartsTable
Technical Data Sheet
Download PDF

5340PL0878350 — PLUG,VENT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5340PL0878350: PLUG,VENT.

The PLUG,VENT is a the manufacturer industrial component. Key specifications include length: 0.468 INCHES NOMINAL IN, material: ALUMINUM ALLOY, thread_class: 2A A, thread_length: 0.190 INCHES NOMINAL IN, inside_diameter: 0.240 INCHES NOMINAL IN, vent_hole_shape: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-349-1669, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5340PL0878350
NSN: 5340-00-349-1669
FSC: 5340 — Hardware, Commercial
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
length0.468 INCHES NOMINAL IN
materialALUMINUM ALLOY
thread_class2A A
thread_length0.190 INCHES NOMINAL IN
inside_diameter0.240 INCHES NOMINAL IN
vent_hole_shapeROUND
outside_diameter0.750 INCHES NOMINAL IN
surface_treatmentANODIZE
vent_hole_diameter0.094 INCHES NOMINAL IN
vent_hole_quantity2
end_connection_typeTHREADED
unthreaded_end_length0.278 INCHES NOMINAL IN
NSN5340-00-349-1669
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5340PL0878350 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
VENT HOLE DIAMETER: 0.094 INCHES NOMINAL IN
•
LENGTH: 0.468 INCHES NOMINAL IN
•
VENT HOLE SHAPE: ROUND
•
THREAD LENGTH: 0.190 INCHES NOMINAL IN
•
END CONNECTION TYPE: THREADED
•
UNTHREADED END DIAMETER: 0.338 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.750 INCHES NOMINAL IN
•
UNTHREADED END LENGTH: 0.278 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
VENT HOLE DIAMETER0.094 INCHES NOMINAL IN
LENGTH0.468 INCHES NOMINAL IN
VENT HOLE SHAPEROUND
THREAD LENGTH0.190 INCHES NOMINAL IN
END CONNECTION TYPETHREADED
UNTHREADED END DIAMETER0.338 INCHES NOMINAL IN
OUTSIDE DIAMETER0.750 INCHES NOMINAL IN
UNTHREADED END LENGTH0.278 INCHES NOMINAL IN
INSIDE DIAMETER0.240 INCHES NOMINAL IN
SURFACE TREATMENTANODIZE
SUBSTITUTES & CROSS-REFERENCES 2
333Reference document
Same NSN cross-reference
Reference document — Secondary reference
33373Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 5340PL0878350?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5340PL0878350?
5340PL0878350 is a PLUG,VENT.
What parts can replace 5340PL0878350?
There are 2 known substitutes for 5340PL0878350: 333, 33373. Substitute compatibility should be verified for your specific system.
What is the NSN for 5340PL0878350?
5340PL0878350 is cataloged in the U.S. Government catalog under NSN 5340-00-349-1669. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5340PL0878350