PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5340PL0850233
5340PL0850233 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024 AND ALUMINUM ALLOY 1230 OR ALUMINUM ALLOY 2024, first_leg_angle: 0.1900 RADIANS NOMINAL, first_leg_style: CORNER RADIUS, first_leg_width: 1.5000 INCHES NOMINAL IN, first_leg_length: 1.0000 INCHES NOMINAL IN, second_leg_style: SQUARE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-398-7057, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5340PL0850233
NSN: 5340-01-398-7057
FSC: 5340
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialALUMINUM ALLOY 2024 AND ALUMINUM ALLOY 1230 OR ALUMINUM ALLOY 2024
first_leg_angle0.1900 RADIANS NOMINAL
first_leg_styleCORNER RADIUS
first_leg_width1.5000 INCHES NOMINAL IN
first_leg_length1.0000 INCHES NOMINAL IN
second_leg_styleSQUARE
second_leg_width0.6000 INCHES NOMINAL IN
style_designatorANGLE
second_leg_length0.7000 INCHES NOMINAL IN
mounting_hole_typePLAIN
first_leg_thickness0.0500 INCHES NOMINAL IN
second_leg_thickness0.0500 INCHES NOMINAL IN
NSN5340-01-398-7057
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5340PL0850233 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/4 FED SPEC SINGLE MATERIAL RESPONSE
•
SECOND LEG STYLE: SQUARE
•
SECOND LEG HOLE DIAMETER: 0.2500 INCHES MINIMUM AND 0.2580 INCHES MAXIMUM IN
•
MATERIAL: ALUMINUM ALLOY 2024 AND ALUMINUM ALLOY 1230 OR ALUMINUM ALLOY 2024
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.2500 INCHES NOMINAL IN
•
MOUNTING HOLE TYPE: PLAIN
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH: 0.3000 INCHES NOMINAL IN
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 1.0000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/4 FED SPEC SINGLE MATERIAL RESPONSE
SECOND LEG STYLESQUARE
SECOND LEG HOLE DIAMETER0.2500 INCHES MINIMUM AND 0.2580 INCHES MAXIMUM IN
MATERIALALUMINUM ALLOY 2024 AND ALUMINUM ALLOY 1230 OR ALUMINUM ALLOY 2024
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.2500 INCHES NOMINAL IN
MOUNTING HOLE TYPEPLAIN
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.3000 INCHES NOMINAL IN
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH1.0000 INCHES NOMINAL IN
SECOND LEG LENGTH0.7000 INCHES NOMINAL IN
FIRST LEG THICKNESS0.0500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
F227A4061EInterchangeable
interchangeable cross-reference
interchangeable
213PInterchangeable
interchangeable cross-reference
interchangeable
831PInterchangeable
interchangeable cross-reference
interchangeable
P-1916Interchangeable
interchangeable cross-reference
interchangeable
SP-60 PIECE 2FInterchangeable
interchangeable cross-reference
interchangeable
R-1916-6RVInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5340PL0850233?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5340PL0850233?
5340PL0850233 is a BRACKET,ANGLE.
What parts can replace 5340PL0850233?
There are 7 known substitutes for 5340PL0850233: F227A4061E, 213P, 831P and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5340PL0850233?
5340PL0850233 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-398-7057. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5340PL0850233

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026