PartsTable
Technical Data Sheet
Download PDF

5340PL0850223 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5340PL0850223: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY OVERALL, thread_class: 3A OVERALL A, overall_width: 0.440 INCHES MINIMUM AND 0.456 INCHES MAXIMUM IN, shank_diameter: 0.285 INCHES MINIMUM AND 0.325 INCHES MAXIMUM IN, fork_span_width: 0.344 INCHES MINIMUM AND 0.346 INCHES MAXIMUM IN, special_features: OA LG 2.615 TO 2.635 IN. IN.

This part is cataloged in the U.S. Government catalog under NSN 5340-01-386-2582, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5340PL0850223
NSN: 5340-01-386-2582
FSC: 5340 — Hardware, Commercial
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialNICKEL ALLOY OVERALL
thread_class3A OVERALL A
overall_width0.440 INCHES MINIMUM AND 0.456 INCHES MAXIMUM IN
shank_diameter0.285 INCHES MINIMUM AND 0.325 INCHES MAXIMUM IN
fork_span_width0.344 INCHES MINIMUM AND 0.346 INCHES MAXIMUM IN
special_featuresOA LG 2.615 TO 2.635 IN. IN
thread_directionLEFT-HAND SHANK
nominal_thread_size0.375 INCHES SHANK IN
end_item_identificationF100 PW0229 ENGINE
thread_series_designatorUNIFIED NATIONAL JOINT FINE (UNJF) SHANK
material_document_and_classificationAMS5663 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
distance_from_pivot_pinhole_center_to_rod_connection_end2.375 INCHES NOMINAL IN
NSN5340-01-386-2582
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5340PL0850223 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.285 INCHES MINIMUM AND 0.325 INCHES MAXIMUM IN
•
FORK SPAN WIDTH: 0.344 INCHES MINIMUM AND 0.346 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5663 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: LEFT-HAND SHANK
•
NOMINAL THREAD SIZE: 0.375 INCHES SHANK IN
•
THREAD CLASS: 3A OVERALL A
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.285 INCHES MINIMUM AND 0.325 INCHES MAXIMUM IN
FORK SPAN WIDTH0.344 INCHES MINIMUM AND 0.346 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS5663 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH0.440 INCHES MINIMUM AND 0.456 INCHES MAXIMUM IN
THREAD DIRECTIONLEFT-HAND SHANK
NOMINAL THREAD SIZE0.375 INCHES SHANK IN
SPECIAL FEATURESOA LG 2.615 TO 2.635 IN. IN
THREAD CLASS3A OVERALL A
END ITEM IDENTIFICATIONF100 PW0229 ENGINE
MATERIALNICKEL ALLOY OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
4080888Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 5340PL0850223?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5340PL0850223?
5340PL0850223 is a CLEVIS,ROD END.
What parts can replace 5340PL0850223?
There is 1 known substitute for 5340PL0850223: 4080888. Substitute compatibility should be verified for your specific system.
What is the NSN for 5340PL0850223?
5340PL0850223 is cataloged in the U.S. Government catalog under NSN 5340-01-386-2582. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5340PL0850223

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.