5340PL0846590 — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

5340PL0846590: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: ALUMINUM ALLOY 2024 BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: ANODIZE BAND. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-054-3842, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

5340PL0846590

NSN: 5340-01-054-3842
FSC: 5340 — Hardware, Commercial
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)

SPECIFICATIONS

diameter	0.204 INCHES NOMINAL IN
material	ALUMINUM ALLOY 2024 BAND
overall_width	0.500 INCHES NOMINAL IN
style_designator	SINGLE LOOP
tongue_hole_type	ROUND, UNTHREADED
surface_treatment	ANODIZE BAND
material_thickness	0.047 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN
loop_inside_diameter	1.298 INCHES MINIMUM AND 1.328 INCHES MAXIMUM IN
distance_from_loop_center_to_tongue_end	1.282 INCHES MINIMUM AND 1.312 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole	1.064 INCHES MINIMUM AND 1.094 INCHES MAXIMUM IN
NSN	5340-01-054-3842

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: SINGLE LOOP

•

DIAMETER: 0.204 INCHES NOMINAL IN

•

MATERIAL THICKNESS: 0.047 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 1.282 INCHES MINIMUM AND 1.312 INCHES MAXIMUM IN

•

SURFACE TREATMENT: ANODIZE BAND

•

TONGUE HOLE TYPE: ROUND, UNTHREADED

•

CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.064 INCHES MINIMUM AND 1.094 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	SINGLE LOOP
DIAMETER	0.204 INCHES NOMINAL IN
OVERALL WIDTH	0.500 INCHES NOMINAL IN
MATERIAL THICKNESS	0.047 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END	1.282 INCHES MINIMUM AND 1.312 INCHES MAXIMUM IN
SURFACE TREATMENT	ANODIZE BAND
TONGUE HOLE TYPE	ROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	1.064 INCHES MINIMUM AND 1.094 INCHES MAXIMUM IN
MATERIAL	PLASTIC POLYTETRAFLUOROETHYLENE CUSHION
MATERIAL	ALUMINUM ALLOY 2024 BAND

SUBSTITUTES & CROSS-REFERENCES 7

TA11C44D21TSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

5340PL1730596Reference document

Same NSN cross-reference

Reference document — Informative reference only

S280D21Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

44LC9D21TSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

477-21Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

JM44LC9D21TSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

No demilitarization required

Ready to buy 5340PL0846590?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 5340PL0846590?

5340PL0846590 is a CLAMP,LOOP.

What parts can replace 5340PL0846590?

There are 7 known substitutes for 5340PL0846590: TA11C44D21T, 5340PL1730596, S280D21 and 4 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 5340PL0846590?

5340PL0846590 is cataloged in the U.S. Government catalog under NSN 5340-01-054-3842. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

5340PL0846590 — CLAMP,LOOP

Request a Quote — 5340PL0846590