PartsTable
Technical Data Sheet
Download PDF

5340PL0846502 — RETAINER,NUT AND BOLT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5340PL0846502: RETAINER,NUT AND BOLT.

The RETAINER,NUT AND BOLT is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024, overall_width: 1.000 INCHES NOMINAL IN, overall_length: 2.000 INCHES NOMINAL IN, material_thickness: 0.190 INCHES NOMINAL IN, mounting_hole_diameter: 0.196 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN, width_between_cup_flats: 0.505 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-047-2711, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5340PL0846502
NSN: 5340-01-047-2711
FSC: 5340 — Hardware, Commercial
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialALUMINUM ALLOY 2024
overall_width1.000 INCHES NOMINAL IN
overall_length2.000 INCHES NOMINAL IN
material_thickness0.190 INCHES NOMINAL IN
mounting_hole_diameter0.196 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN
width_between_cup_flats0.505 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
material_document_and_classificationQQ-A-250/4, T81 FED SPEC SINGLE MATERIAL RESPONSE
center_to_center_distance_between_cup_and_mounting_hole0.735 INCHES NOMINAL IN
NSN5340-01-047-2711
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5340PL0846502 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/4, T81 FED SPEC SINGLE MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.196 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.190 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN CUP AND MOUNTING HOLE: 0.735 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM ALLOY 2024
•
WIDTH BETWEEN CUP FLATS: 0.505 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/4, T81 FED SPEC SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER0.196 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN
OVERALL LENGTH2.000 INCHES NOMINAL IN
OVERALL WIDTH1.000 INCHES NOMINAL IN
MATERIAL THICKNESS0.190 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN CUP AND MOUNTING HOLE0.735 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY 2024
WIDTH BETWEEN CUP FLATS0.505 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
16K0583-7Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 5340PL0846502?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5340PL0846502?
5340PL0846502 is a RETAINER,NUT AND BOLT.
What parts can replace 5340PL0846502?
There is 1 known substitute for 5340PL0846502: 16K0583-7. Substitute compatibility should be verified for your specific system.
What is the NSN for 5340PL0846502?
5340PL0846502 is cataloged in the U.S. Government catalog under NSN 5340-01-047-2711. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5340PL0846502

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.