PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5340PL0846306
5340PL0846306 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,INSTRUMENT MOUNTING is a the manufacturer industrial component. Key specifications include width: 0.750 INCHES NOMINAL IN, material: ALUMINUM ALLOY 2014 AND ALUMINUM ALLOY 6003 AND ALUMINUM ALLOY 6061, material_document_and_classification: QQ-250/11 OR 3 FED SPEC SINGLE MATERIAL RESPONSE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-905-4975, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5340PL0846306
NSN: 5340-00-905-4975
FSC: 5340
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
width0.750 INCHES NOMINAL IN
materialALUMINUM ALLOY 2014 AND ALUMINUM ALLOY 6003 AND ALUMINUM ALLOY 6061
material_document_and_classificationQQ-250/11 OR 3 FED SPEC SINGLE MATERIAL RESPONSE
NSN5340-00-905-4975
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5340PL0846306 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: ALUMINUM ALLOY 2014 AND ALUMINUM ALLOY 6003 AND ALUMINUM ALLOY 6061
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-250/11 OR 3 FED SPEC SINGLE MATERIAL RESPONSE
•
WIDTH: 0.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALALUMINUM ALLOY 2014 AND ALUMINUM ALLOY 6003 AND ALUMINUM ALLOY 6061
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-250/11 OR 3 FED SPEC SINGLE MATERIAL RESPONSE
WIDTH0.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
61-03-6Interchangeable
interchangeable cross-reference
interchangeable
B68Interchangeable
interchangeable cross-reference
interchangeable
68BInterchangeable
interchangeable cross-reference
interchangeable
H6103600Interchangeable
interchangeable cross-reference
interchangeable
C8102Interchangeable
interchangeable cross-reference
interchangeable
X305Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5340PL0846306?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5340PL0846306?
5340PL0846306 is a CLAMP,INSTRUMENT MOUNTING.
What parts can replace 5340PL0846306?
There are 8 known substitutes for 5340PL0846306: 61-03-6, B68, 68B and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5340PL0846306?
5340PL0846306 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-905-4975. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5340PL0846306

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026