The PLUG,VENT is a the manufacturer industrial component. Key specifications include length: 0.370 INCHES NOMINAL IN, material: ALUMINUM ALLOY 7075, inside_diameter: 0.460 INCHES NOMINAL IN, vent_hole_shape: ROUND, outside_diameter: 1.188 INCHES NOMINAL IN, surface_treatment: PAINT. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-260-0715, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
5340PL0803792
NSN:5340-01-260-0715 FSC:5340 — Hardware, Commercial CAGE:9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
length
0.370 INCHES NOMINAL IN
material
ALUMINUM ALLOY 7075
inside_diameter
0.460 INCHES NOMINAL IN
vent_hole_shape
ROUND
outside_diameter
1.188 INCHES NOMINAL IN
special_features
ONE AXIAL THRU MTG HOLE 0.250 IN. DIA W/CBORE 0.265 IN. MIN 0.272 IN. MAX DIA; 0.060 IN. DP; URETHANE,MIL-P-83286,WHITE,FED STD 595,COLOR 17875 IN
surface_treatment
PAINT
vent_hole_diameter
0.127 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN
vent_hole_quantity
2
end_connection_type
UNTHREADED
unthreaded_end_length
0.150 INCHES NOMINAL IN
supplementary_features
ITEM IS NOT CSI BUT HAS CRITICAL FEATURE THAT MUST MAINTAIN A TIGHT FIT TOLERANCE AND DIMENSIONS TO MAINTAIN SAFE OPERATION OF AIRCRAFT
NSN
5340-01-260-0715
COMPONENT DIAGRAM
KEY FEATURES
•
VENT HOLE DIAMETER: 0.127 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN
•
LENGTH: 0.370 INCHES NOMINAL IN
•
VENT HOLE SHAPE: ROUND
•
SUPPLEMENTARY FEATURES: ITEM IS NOT CSI BUT HAS CRITICAL FEATURE THAT MUST MAINTAIN A TIGHT FIT TOLERANCE AND DIMENSIONS TO MAINTAIN SAFE OPERATION OF AIRCRAFT
•
END CONNECTION TYPE: UNTHREADED
•
CRITICALITY CODE JUSTIFICATION: SUPP
•
UNTHREADED END DIAMETER: 0.460 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/9, T73 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-225/9, T7351 FED SPEC SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS
VENT HOLE DIAMETER
0.127 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN
LENGTH
0.370 INCHES NOMINAL IN
VENT HOLE SHAPE
ROUND
SUPPLEMENTARY FEATURES
ITEM IS NOT CSI BUT HAS CRITICAL FEATURE THAT MUST MAINTAIN A TIGHT FIT TOLERANCE AND DIMENSIONS TO MAINTAIN SAFE OPERATION OF AIRCRAFT
END CONNECTION TYPE
UNTHREADED
CRITICALITY CODE JUSTIFICATION
SUPP
UNTHREADED END DIAMETER
0.460 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION
QQ-A-225/9, T73 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-225/9, T7351 FED SPEC SINGLE MATERIAL RESPONSE
OUTSIDE DIAMETER
1.188 INCHES NOMINAL IN
UNTHREADED END LENGTH
0.150 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5340PL0803792?
5340PL0803792 is a PLUG,VENT.
What parts can replace 5340PL0803792?
There is 1 known substitute for 5340PL0803792: 2007406-3. Substitute compatibility should be verified for your specific system.
What is the NSN for 5340PL0803792?
5340PL0803792 is cataloged in the U.S. Government catalog under NSN 5340-01-260-0715. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.