5340PL0725354 — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

5340PL0725354: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN, material: STEEL COMP 321 BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.063 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-040-5246, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

5340PL0725354

NSN: 5340-01-040-5246
FSC: 5340 — Hardware, Commercial
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)

SPECIFICATIONS

diameter	0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
material	STEEL COMP 321 BAND
overall_width	0.500 INCHES NOMINAL IN
style_designator	OFFSET MOUNT
tongue_hole_type	ROUND, UNTHREADED
material_thickness	0.063 INCHES NOMINAL IN
loop_inside_diameter	1.832 INCHES MINIMUM AND 1.874 INCHES MAXIMUM IN
material_document_and_classification	AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end	1.135 INCHES MINIMUM AND 1.155 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole	1.342 INCHES NOMINAL IN
NSN	5340-01-040-5246

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: OFFSET MOUNT

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND

•

DIAMETER: 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN

•

MATERIAL THICKNESS: 0.063 INCHES NOMINAL IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 1.135 INCHES MINIMUM AND 1.155 INCHES MAXIMUM IN

•

TONGUE HOLE TYPE: ROUND, UNTHREADED

•

CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.342 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	OFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND
DIAMETER	0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
OVERALL WIDTH	0.500 INCHES NOMINAL IN
MATERIAL THICKNESS	0.063 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END	1.135 INCHES MINIMUM AND 1.155 INCHES MAXIMUM IN
TONGUE HOLE TYPE	ROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	1.342 INCHES NOMINAL IN
MATERIAL	STEEL COMP 321 BAND
MATERIAL	PLASTIC TETRAFLUOROETHYLENE CUSHION

OTHER ITEMS IN FSC 5340 — Hardware, Commercial

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275

SUBSTITUTES & CROSS-REFERENCES 2

JP1107SH28Reference document

Same NSN cross-reference

Reference document — Secondary reference

465SS-28Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

No demilitarization required

Ready to buy 5340PL0725354?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 5340PL0725354?

5340PL0725354 is a CLAMP,LOOP.

What parts can replace 5340PL0725354?

There are 2 known substitutes for 5340PL0725354: JP1107SH28, 465SS-28. Substitute compatibility should be verified for your specific system.

What is the NSN for 5340PL0725354?

5340PL0725354 is cataloged in the U.S. Government catalog under NSN 5340-01-040-5246. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

5340PL0725354 — CLAMP,LOOP

Request a Quote — 5340PL0725354