PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5340PL0712954
5340PL0712954 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

PLUG,PROTECTIVE,DUST AND MOISTUR. Key specifications include material: PLASTIC, POLYETHYLENE (PP), design_type: FRICTION, overall_diameter: 0.781 INCHES NOMINAL IN, features_provided: SHOULDER, opening_inside_diameter_for_which_designed: 0.625 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-530-6817, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5340PL0712954
NSN: 5340-00-530-6817
FSC: 5340
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialPLASTIC, POLYETHYLENE (PP)
design_typeFRICTION
overall_diameter0.781 INCHES NOMINAL IN
features_providedSHOULDER
opening_inside_diameter_for_which_designed0.625 INCHES NOMINAL IN
NSN5340-00-530-6817
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5340PL0712954 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OPENING INSIDE DIAMETER FOR WHICH DESIGNED: 0.625 INCHES NOMINAL IN
•
FEATURES PROVIDED: SHOULDER
•
OVERALL DIAMETER: 0.781 INCHES NOMINAL IN
•
MATERIAL: PLASTIC, POLYETHYLENE (PP)
•
DESIGN TYPE: FRICTION
TECHNICAL CHARACTERISTICS (FLIS)
OPENING INSIDE DIAMETER FOR WHICH DESIGNED0.625 INCHES NOMINAL IN
FEATURES PROVIDEDSHOULDER
OVERALL DIAMETER0.781 INCHES NOMINAL IN
MATERIALPLASTIC, POLYETHYLENE (PP)
DESIGN TYPEFRICTION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
EP10Upgraded Successor
successor cross-reference
successor
EP-12Interchangeable
interchangeable cross-reference
interchangeable
9042-00Interchangeable
interchangeable cross-reference
interchangeable
5M0B009864Interchangeable
Same NIIN cross-reference
interchangeable
B009864Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5340PL0712954?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5340PL0712954?
5340PL0712954 is a PLUG,PROTECTIVE,DUST AND MOISTUR.
What parts can replace 5340PL0712954?
There are 5 known substitutes for 5340PL0712954: EP10, EP-12, 9042-00 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5340PL0712954?
5340PL0712954 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-530-6817. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5340PL0712954

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026