PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5340PL0652110
5340PL0652110 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.201 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: ALUMINUM ALLOY 2024 BAND, overall_width: 0.375 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: ANODIZE BAND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-990-5186, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5340PL0652110
NSN: 5340-00-990-5186
FSC: 5340
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
diameter0.201 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
materialALUMINUM ALLOY 2024 BAND
overall_width0.375 INCHES NOMINAL IN
style_designatorOFFSET MOUNT
tongue_hole_typeROUND, UNTHREADED
surface_treatmentANODIZE BAND
material_thickness0.029 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN
loop_inside_diameter0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
material_document_and_classificationQQ-A-250/5,T4 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end0.780 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.592 INCHES NOMINAL IN
NSN5340-00-990-5186
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5340PL0652110 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.029 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN
•
DIAMETER: 0.201 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
•
SURFACE TREATMENT: ANODIZE BAND
•
STYLE DESIGNATOR: OFFSET MOUNT
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/5,T4 FED SPEC SINGLE MATERIAL RESPONSE BAND
•
MATERIAL: ALUMINUM ALLOY 2024 BAND
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.592 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.029 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN
DIAMETER0.201 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
SURFACE TREATMENTANODIZE BAND
STYLE DESIGNATOROFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/5,T4 FED SPEC SINGLE MATERIAL RESPONSE BAND
MATERIALALUMINUM ALLOY 2024 BAND
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.592 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
MATERIALPLASTIC CUSHION
OVERALL WIDTH0.375 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
376872Interchangeable
interchangeable cross-reference
interchangeable
PS376872Interchangeable
interchangeable cross-reference
interchangeable
4778Interchangeable
interchangeable cross-reference
interchangeable
31648G1Interchangeable
interchangeable cross-reference
interchangeable
7267Interchangeable
interchangeable cross-reference
interchangeable
C5 RED POWDER LOADInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5340PL0652110?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5340PL0652110?
5340PL0652110 is a CLAMP,LOOP.
What parts can replace 5340PL0652110?
There are 14 known substitutes for 5340PL0652110: 376872, PS376872, 4778 and 11 more. Substitute compatibility should be verified for your specific system.
Is 5340PL0652110 still available?
5340PL0652110 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5340PL0652110

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026