PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5340PL0642705
5340PL0642705 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include overall_width: 0.875 INCHES NOMINAL IN, style_designator: CLEVIS, distance_from_pivot_pinhole_center_to_rod_connection_end: 2.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-052-1492, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5340PL0642705
NSN: 5340-00-052-1492
FSC: 5340
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
overall_width0.875 INCHES NOMINAL IN
style_designatorCLEVIS
distance_from_pivot_pinhole_center_to_rod_connection_end2.500 INCHES NOMINAL IN
NSN5340-00-052-1492
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5340PL0642705 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM PIVOT PINHOLE CENTER TO ROD CONNECTION END: 2.500 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CLEVIS
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.875 INCHES NOMINAL IN
DISTANCE FROM PIVOT PINHOLE CENTER TO ROD CONNECTION END2.500 INCHES NOMINAL IN
STYLE DESIGNATORCLEVIS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
12GMUpgraded Successor
successor cross-reference
successor
7AUpgraded Successor
successor cross-reference
successor
2600Upgraded Successor
successor cross-reference
successor
AE402Upgraded Successor
successor cross-reference
successor
Y4Upgraded Successor
successor cross-reference
successor
18SM1282Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5340PL0642705?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5340PL0642705?
5340PL0642705 is a CLEVIS,ROD END.
What parts can replace 5340PL0642705?
There are 15 known substitutes for 5340PL0642705: 12GM, 7A, 2600 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5340PL0642705?
5340PL0642705 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-052-1492. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5340PL0642705

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026