PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5340A01-003
5340A01-003 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.281 INCHES NOMINAL IN, material: STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: CADMIUM BAND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-796-4341, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5340A01-003
NSN: 5340-00-796-4341
FSC: 5340
CAGE: 81996 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
diameter0.281 INCHES NOMINAL IN
materialSTEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 BAND
overall_width0.500 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
surface_treatmentCADMIUM BAND
material_thickness0.036 INCHES NOMINAL IN
loop_inside_diameter0.338 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end0.750 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.500 INCHES NOMINAL IN
NSN5340-00-796-4341
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5340A01-003 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
MATERIAL THICKNESS: 0.036 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.750 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC CUSHION
•
SURFACE TREATMENT: CADMIUM BAND
•
STYLE DESIGNATOR: SINGLE LOOP
TECHNICAL CHARACTERISTICS (FLIS)
TONGUE HOLE TYPEROUND, UNTHREADED
MATERIAL THICKNESS0.036 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.750 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC CUSHION
SURFACE TREATMENTCADMIUM BAND
MATERIALSTEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 BAND
STYLE DESIGNATORSINGLE LOOP
LOOP INSIDE DIAMETER0.338 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
00725665410130Interchangeable
interchangeable cross-reference
interchangeable
683RH-7/16-3/8SInterchangeable
interchangeable cross-reference
interchangeable
51-10006Interchangeable
interchangeable cross-reference
interchangeable
43506Interchangeable
interchangeable cross-reference
interchangeable
43506-135SS1250SPInterchangeable
interchangeable cross-reference
interchangeable
45320Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5340A01-003?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5340A01-003?
5340A01-003 is a CLAMP,LOOP.
What parts can replace 5340A01-003?
There are 9 known substitutes for 5340A01-003: 00725665410130, 683RH-7/16-3/8S, 51-10006 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5340A01-003?
5340A01-003 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-796-4341. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5340A01-003

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026