PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5340284
5340284 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The COVER,ACCESS is a the manufacturer industrial component. Key specifications include width: 4.750 INCHES NOMINAL IN, length: 5.500 INCHES NOMINAL IN, material: IRON, hole_diameter: 0.437 INCHES NOMINAL IN, body_thickness: 0.187 INCHES NOMINAL IN, inside_diameter: 3.750 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-318-0025, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5340284
NSN: 5340-00-318-0025
FSC: 5340
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
width4.750 INCHES NOMINAL IN
length5.500 INCHES NOMINAL IN
materialIRON
hole_diameter0.437 INCHES NOMINAL IN
body_thickness0.187 INCHES NOMINAL IN
inside_diameter3.750 INCHES NOMINAL IN
flange_thickness0.250 INCHES NOMINAL IN
fsc_application_dataTIMING GEAR COVER
securing_device_typeTHREADED FASTENER
first_recess_inside_height0.062 INCHES NOMINAL IN
hole_quantity_along_length4
mounting_opening_shape_styleUNTHREADED HOLE
NSN5340-00-318-0025
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5340284 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING OPENING SHAPE STYLE: UNTHREADED HOLE
•
FIRST RECESS INSIDE HEIGHT: 0.062 INCHES NOMINAL IN
•
DISTANCE BETWEEN HOLES ALONG WIDTH: 3.000 INCHES NOMINAL IN
•
BODY THICKNESS: 0.187 INCHES NOMINAL IN
•
HOLE QUANTITY ALONG LENGTH: 4
•
FSC APPLICATION DATA: TIMING GEAR COVER
•
SECURING DEVICE TYPE: THREADED FASTENER
•
LENGTH: 5.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MOUNTING OPENING SHAPE STYLEUNTHREADED HOLE
FIRST RECESS INSIDE HEIGHT0.062 INCHES NOMINAL IN
DISTANCE BETWEEN HOLES ALONG WIDTH3.000 INCHES NOMINAL IN
BODY THICKNESS0.187 INCHES NOMINAL IN
HOLE QUANTITY ALONG LENGTH4
FSC APPLICATION DATATIMING GEAR COVER
SECURING DEVICE TYPETHREADED FASTENER
LENGTH5.500 INCHES NOMINAL IN
HOLE DIAMETER0.437 INCHES NOMINAL IN
WIDTH4.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
58335 AND 62293Interchangeable
interchangeable cross-reference
interchangeable
J454PC3T012 1-2Interchangeable
interchangeable cross-reference
interchangeable
J445PC3T012 3-8Interchangeable
interchangeable cross-reference
interchangeable
48580Interchangeable
interchangeable cross-reference
interchangeable
2120 1-1/4Interchangeable
interchangeable cross-reference
interchangeable
157 1-1/4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5340284?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5340284?
5340284 is a COVER,ACCESS.
What parts can replace 5340284?
There are 7 known substitutes for 5340284: 58335 AND 62293, J454PC3T012 1-2, J445PC3T012 3-8 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5340284?
5340284 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-318-0025. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5340284

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026