PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5340010822126
5340010822126 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include overall_width: 0.750 INCHES NOMINAL IN, style_designator: TWO PIECE, material_thickness: 0.280 INCHES NOMINAL IN, loop_inside_diameter: 2.880 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-082-2126, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5340010822126
NSN: 5340-01-082-2126
FSC: 5340
CAGE: A00AM — E.C.A ETABLISSEMENT CENTRAL DES APPROVISIONNEMENTS DES FORCES ARMEES ROYALES
SPECIFICATIONS
overall_width0.750 INCHES NOMINAL IN
style_designatorTWO PIECE
material_thickness0.280 INCHES NOMINAL IN
loop_inside_diameter2.880 INCHES NOMINAL IN
NSN5340-01-082-2126
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5340010822126 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.280 INCHES NOMINAL IN
•
STYLE DESIGNATOR: TWO PIECE
•
LOOP INSIDE DIAMETER: 2.880 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.280 INCHES NOMINAL IN
STYLE DESIGNATORTWO PIECE
LOOP INSIDE DIAMETER2.880 INCHES NOMINAL IN
OVERALL WIDTH0.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
3439PL2088524Interchangeable
interchangeable cross-reference
interchangeable
HS-30AInterchangeable
interchangeable cross-reference
interchangeable
30AInterchangeable
interchangeable cross-reference
interchangeable
X275Interchangeable
interchangeable cross-reference
interchangeable
X278.5-RInterchangeable
interchangeable cross-reference
interchangeable
26425AXInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5340010822126?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5340010822126?
5340010822126 is a CLAMP,LOOP.
What parts can replace 5340010822126?
There are 6 known substitutes for 5340010822126: 3439PL2088524, HS-30A, 30A and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5340010822126?
5340010822126 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-082-2126. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5340010822126

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026