PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5340010074980
5340010074980 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The STRAP,RETAINING is a the manufacturer industrial component. Key specifications include cushion: NOT INCLUDED, material: STEEL LOCATION NOT OTHERWISE SPECIFIED, mounting_pad: NOT INCLUDED, overall_width: 0.844 INCHES NOMINAL IN, overall_length: 2.000 INCHES NOMINAL IN, style_designator: CURVED ARCH. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-007-4980, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5340010074980
NSN: 5340-01-007-4980
FSC: 5340
CAGE: A00AM — E.C.A ETABLISSEMENT CENTRAL DES APPROVISIONNEMENTS DES FORCES ARMEES ROYALES
SPECIFICATIONS
cushionNOT INCLUDED
materialSTEEL LOCATION NOT OTHERWISE SPECIFIED
mounting_padNOT INCLUDED
overall_width0.844 INCHES NOMINAL IN
overall_length2.000 INCHES NOMINAL IN
style_designatorCURVED ARCH
surface_treatmentCADMIUM
mounting_hole_size0.274 INCHES MINIMUM AND 0.399 INCHES MAXIMUM IN
inside_diameter/arch_length0.844 INCHES NOMINAL IN
distance_between_base_and_inside_of_arch0.797 INCHES NOMINAL IN
center_to_center_distance_between_arch_and_mounting_hole1.016 INCHES NOMINAL IN
NSN5340-01-007-4980
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5340010074980 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER TO CENTER DISTANCE BETWEEN ARCH AND MOUNTING HOLE: 1.016 INCHES NOMINAL IN
•
MOUNTING PAD: NOT INCLUDED
•
DISTANCE BETWEEN BASE AND INSIDE OF ARCH: 0.797 INCHES NOMINAL IN
•
INSIDE DIAMETER/ARCH LENGTH: 0.844 INCHES NOMINAL IN
•
MOUNTING HOLE SIZE: 0.274 INCHES MINIMUM AND 0.399 INCHES MAXIMUM IN
•
CUSHION: NOT INCLUDED
•
STYLE DESIGNATOR: CURVED ARCH
•
MATERIAL: STEEL LOCATION NOT OTHERWISE SPECIFIED
TECHNICAL CHARACTERISTICS (FLIS)
CENTER TO CENTER DISTANCE BETWEEN ARCH AND MOUNTING HOLE1.016 INCHES NOMINAL IN
MOUNTING PADNOT INCLUDED
DISTANCE BETWEEN BASE AND INSIDE OF ARCH0.797 INCHES NOMINAL IN
INSIDE DIAMETER/ARCH LENGTH0.844 INCHES NOMINAL IN
MOUNTING HOLE SIZE0.274 INCHES MINIMUM AND 0.399 INCHES MAXIMUM IN
CUSHIONNOT INCLUDED
STYLE DESIGNATORCURVED ARCH
MATERIALSTEEL LOCATION NOT OTHERWISE SPECIFIED
SURFACE TREATMENTCADMIUM
OVERALL WIDTH0.844 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
32295-011Upgraded Successor
successor cross-reference
successor
73-0011Upgraded Successor
successor cross-reference
successor
123011Upgraded Successor
successor cross-reference
successor
NE5025Upgraded Successor
successor cross-reference
successor
1211Upgraded Successor
successor cross-reference
successor
126668Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5340010074980?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5340010074980?
5340010074980 is a STRAP,RETAINING.
What parts can replace 5340010074980?
There are 6 known substitutes for 5340010074980: 32295-011, 73-0011, 123011 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5340010074980?
5340010074980 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-007-4980. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5340010074980

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026