PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5340008904336
5340008904336 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PLUG,EXPANSION is a the manufacturer industrial component. Key specifications include radius: 1.140 INCHES MINIMUM AND 1.172 INCHES MAXIMUM IN, material: STEEL CORROSION RESISTING, outside_diameter: 0.934 INCHES MINIMUM AND 0.940 INCHES MAXIMUM IN, style_designator: CONCAVE, material_thickness: 0.075 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-890-4336, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5340008904336
NSN: 5340-00-890-4336
FSC: 5340
CAGE: SCY13 — E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
SPECIFICATIONS
radius1.140 INCHES MINIMUM AND 1.172 INCHES MAXIMUM IN
materialSTEEL CORROSION RESISTING
outside_diameter0.934 INCHES MINIMUM AND 0.940 INCHES MAXIMUM IN
style_designatorCONCAVE
material_thickness0.075 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN
NSN5340-00-890-4336
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5340008904336 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.075 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN
•
MATERIAL: STEEL CORROSION RESISTING
•
RADIUS: 1.140 INCHES MINIMUM AND 1.172 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.934 INCHES MINIMUM AND 0.940 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CONCAVE
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.075 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN
MATERIALSTEEL CORROSION RESISTING
RADIUS1.140 INCHES MINIMUM AND 1.172 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.934 INCHES MINIMUM AND 0.940 INCHES MAXIMUM IN
STYLE DESIGNATORCONCAVE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
BEDX1ADInterchangeable
interchangeable cross-reference
interchangeable
22-57-1Interchangeable
interchangeable cross-reference
interchangeable
5214781Interchangeable
interchangeable cross-reference
interchangeable
172547Interchangeable
interchangeable cross-reference
interchangeable
12G101Interchangeable
interchangeable cross-reference
interchangeable
117920Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5340008904336?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5340008904336?
5340008904336 is a PLUG,EXPANSION.
What parts can replace 5340008904336?
There are 19 known substitutes for 5340008904336: BEDX1AD, 22-57-1, 5214781 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5340008904336?
5340008904336 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-890-4336. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5340008904336

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026