PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5340006263077
5340006263077 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.343 INCHES NOMINAL IN, material: STEEL BAND, overall_width: 0.687 INCHES NOMINAL IN, style_designator: TWO PIECE, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.250 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-626-3077, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5340006263077
NSN: 5340-00-626-3077
FSC: 5340
CAGE: SCY13 — E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
SPECIFICATIONS
diameter0.343 INCHES NOMINAL IN
materialSTEEL BAND
overall_width0.687 INCHES NOMINAL IN
style_designatorTWO PIECE
tongue_hole_typeROUND, UNTHREADED
material_thickness0.250 INCHES NOMINAL IN
loop_inside_diameter2.000 INCHES NOMINAL IN
NSN5340-00-626-3077
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5340006263077 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOOP INSIDE DIAMETER: 2.000 INCHES NOMINAL IN
•
MATERIAL: STEEL BAND
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
MATERIAL THICKNESS: 0.250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: TWO PIECE
•
DIAMETER: 0.343 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.687 INCHES NOMINAL IN
LOOP INSIDE DIAMETER2.000 INCHES NOMINAL IN
MATERIALSTEEL BAND
TONGUE HOLE TYPEROUND, UNTHREADED
MATERIAL THICKNESS0.250 INCHES NOMINAL IN
STYLE DESIGNATORTWO PIECE
DIAMETER0.343 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
35408Interchangeable
interchangeable cross-reference
interchangeable
A100-662-3Interchangeable
interchangeable cross-reference
interchangeable
8341-1Interchangeable
interchangeable cross-reference
interchangeable
41-207-1Interchangeable
interchangeable cross-reference
interchangeable
SAE-J20/1Interchangeable
interchangeable cross-reference
interchangeable
80-7646-01Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5340006263077?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5340006263077?
5340006263077 is a CLAMP,LOOP.
What parts can replace 5340006263077?
There are 17 known substitutes for 5340006263077: 35408, A100-662-3, 8341-1 and 14 more. Substitute compatibility should be verified for your specific system.
Is 5340006263077 still available?
5340006263077 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5340006263077

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026