PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5340005979519
5340005979519 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: RUBBER SYNTHETIC CUSHION, overall_width: 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: CADMIUM BAND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-597-9519, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5340005979519
NSN: 5340-00-597-9519
FSC: 5340
CAGE: SCY13 — E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
SPECIFICATIONS
diameter0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
materialRUBBER SYNTHETIC CUSHION
overall_width0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
style_designatorOFFSET MOUNT
tongue_hole_typeROUND, UNTHREADED
surface_treatmentCADMIUM BAND
material_thickness0.025 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
loop_inside_diameter0.563 INCHES NOMINAL IN
material_document_and_classificationAMS 6350 ASSN STD SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end0.836 INCHES MINIMUM AND 0.846 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole0.618 INCHES MINIMUM AND 0.628 INCHES MAXIMUM IN
NSN5340-00-597-9519
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5340005979519 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: CADMIUM BAND
•
STYLE DESIGNATOR: OFFSET MOUNT
•
MATERIAL: RUBBER SYNTHETIC CUSHION
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.836 INCHES MINIMUM AND 0.846 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.618 INCHES MINIMUM AND 0.628 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.025 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTCADMIUM BAND
STYLE DESIGNATOROFFSET MOUNT
MATERIALRUBBER SYNTHETIC CUSHION
OVERALL WIDTH0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.836 INCHES MINIMUM AND 0.846 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.618 INCHES MINIMUM AND 0.628 INCHES MAXIMUM IN
MATERIAL THICKNESS0.025 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
TONGUE HOLE TYPEROUND, UNTHREADED
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6350 ASSN STD SINGLE MATERIAL RESPONSE BAND
LOOP INSIDE DIAMETER0.563 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
MS9024-04Interchangeable
interchangeable cross-reference
interchangeable
NAS1715C5NInterchangeable
interchangeable cross-reference
interchangeable
MS9024Interchangeable
interchangeable cross-reference
interchangeable
MS9024-15Interchangeable
interchangeable cross-reference
interchangeable
MS9024-19Interchangeable
interchangeable cross-reference
interchangeable
226Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5340005979519?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5340005979519?
5340005979519 is a CLAMP,LOOP.
What parts can replace 5340005979519?
There are 17 known substitutes for 5340005979519: MS9024-04, NAS1715C5N, MS9024 and 14 more. Substitute compatibility should be verified for your specific system.
Is 5340005979519 still available?
5340005979519 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5340005979519

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026