PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5340005823330
5340005823330 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PLUG,EXPANSION is a the manufacturer industrial component. Key specifications include radius: 0.219 INCHES NOMINAL IN, material: STEEL, outside_diameter: 0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN, style_designator: CONCAVE, surface_treatment: COPPER, material_thickness: 0.032 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-582-3330, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5340005823330
NSN: 5340-00-582-3330
FSC: 5340
CAGE: A00AM — E.C.A ETABLISSEMENT CENTRAL DES APPROVISIONNEMENTS DES FORCES ARMEES ROYALES
SPECIFICATIONS
radius0.219 INCHES NOMINAL IN
materialSTEEL
outside_diameter0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
style_designatorCONCAVE
surface_treatmentCOPPER
material_thickness0.032 INCHES NOMINAL IN
NSN5340-00-582-3330
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5340005823330 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RADIUS: 0.219 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
•
MATERIAL: STEEL
•
SURFACE TREATMENT: COPPER
•
STYLE DESIGNATOR: CONCAVE
•
OUTSIDE DIAMETER: 0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
RADIUS0.219 INCHES NOMINAL IN
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
MATERIALSTEEL
SURFACE TREATMENTCOPPER
STYLE DESIGNATORCONCAVE
OUTSIDE DIAMETER0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
5340010541817Interchangeable
interchangeable cross-reference
interchangeable
MIL-P-20691Interchangeable
interchangeable cross-reference
interchangeable
MS35648-1Interchangeable
interchangeable cross-reference
interchangeable
204567Interchangeable
interchangeable cross-reference
interchangeable
541424Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5340005823330?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5340005823330?
5340005823330 is a PLUG,EXPANSION.
What parts can replace 5340005823330?
There are 5 known substitutes for 5340005823330: 5340010541817, MIL-P-20691, MS35648-1 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5340005823330?
5340005823330 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-582-3330. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5340005823330

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026