PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5340001112707
5340001112707 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The STRAP,RETAINING is a the manufacturer industrial component. Key specifications include cushion: NOT INCLUDED, material: STEEL LOCATION NOT OTHERWISE SPECIFIED, mounting_pad: NOT INCLUDED, overall_width: 0.562 INCHES NOMINAL IN, overall_length: 6.750 INCHES NOMINAL IN, style_designator: MULTIPLE ARCH. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-111-2707, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5340001112707
NSN: 5340-00-111-2707
FSC: 5340
CAGE: SCY13 — E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
SPECIFICATIONS
cushionNOT INCLUDED
materialSTEEL LOCATION NOT OTHERWISE SPECIFIED
mounting_padNOT INCLUDED
arch_quantity7
overall_width0.562 INCHES NOMINAL IN
overall_length6.750 INCHES NOMINAL IN
style_designatorMULTIPLE ARCH
material_thickness0.060 INCHES NOMINAL IN
distance_between_mounting_hole_centers6.000 INCHES NOMINAL IN
NSN5340-00-111-2707
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5340001112707 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING PAD: NOT INCLUDED
•
MATERIAL: STEEL LOCATION NOT OTHERWISE SPECIFIED
•
STYLE DESIGNATOR: MULTIPLE ARCH
•
CUSHION: NOT INCLUDED
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 6.000 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.060 INCHES NOMINAL IN
•
ARCH QUANTITY: 7
TECHNICAL CHARACTERISTICS (FLIS)
MOUNTING PADNOT INCLUDED
MATERIALSTEEL LOCATION NOT OTHERWISE SPECIFIED
STYLE DESIGNATORMULTIPLE ARCH
CUSHIONNOT INCLUDED
DISTANCE BETWEEN MOUNTING HOLE CENTERS6.000 INCHES NOMINAL IN
MATERIAL THICKNESS0.060 INCHES NOMINAL IN
OVERALL LENGTH6.750 INCHES NOMINAL IN
ARCH QUANTITY7
OVERALL WIDTH0.562 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
8734427Interchangeable
interchangeable cross-reference
interchangeable
25346Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5340001112707?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5340001112707?
5340001112707 is a STRAP,RETAINING.
What parts can replace 5340001112707?
There are 2 known substitutes for 5340001112707: 8734427, 25346. Substitute compatibility should be verified for your specific system.
What is the NSN for 5340001112707?
5340001112707 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-111-2707. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5340001112707

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026