PartsTable
Technical Data Sheet
5340000501588 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PLUG,EXPANSION is a the manufacturer industrial component. Key specifications include radius: 0.469 INCHES NOMINAL IN, material: STEEL COMP 1010, outside_diameter: 0.435 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN, style_designator: CONCAVE, material_thickness: 0.060 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN, material_document_and_classification: ASTM A108 ASSN STD SINGLE MATERIAL RESPONSE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-050-1588, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5340000501588
NSN: 5340-00-050-1588
FSC: 5340
CAGE: A00AM — E.C.A ETABLISSEMENT CENTRAL DES APPROVISIONNEMENTS DES FORCES ARMEES ROYALES
SPECIFICATIONS
radius0.469 INCHES NOMINAL IN
materialSTEEL COMP 1010
outside_diameter0.435 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
style_designatorCONCAVE
material_thickness0.060 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN
material_document_and_classificationASTM A108 ASSN STD SINGLE MATERIAL RESPONSE
NSN5340-00-050-1588
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5340000501588 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
MATERIAL THICKNESS: 0.060 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN
MATERIAL: STEEL COMP 1010
OUTSIDE DIAMETER: 0.435 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
STYLE DESIGNATOR: CONCAVE
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A108 ASSN STD SINGLE MATERIAL RESPONSE
RADIUS: 0.469 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.060 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN
MATERIALSTEEL COMP 1010
OUTSIDE DIAMETER0.435 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
STYLE DESIGNATORCONCAVE
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A108 ASSN STD SINGLE MATERIAL RESPONSE
RADIUS0.469 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
172526-H1Upgraded Successor
successor cross-reference
successor
172526Upgraded Successor
successor cross-reference
successor
172547Interchangeable
interchangeable cross-reference
interchangeable
12G101Interchangeable
interchangeable cross-reference
interchangeable
117920Interchangeable
interchangeable cross-reference
interchangeable
117917Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5340000501588?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5340000501588?
5340000501588 is a PLUG,EXPANSION.
What parts can replace 5340000501588?
There are 23 known substitutes for 5340000501588: 172526-H1, 172526, 172547 and 20 more. Substitute compatibility should be verified for your specific system.
Is 5340000501588 still available?
5340000501588 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5340000501588