PartsTable
Technical Data Sheet
Download PDF

5340-517-3424 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5340-517-3424: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OR STEEL, first_leg_angle: 150.0 DEGREES NOMINAL, first_leg_style: CORNER RADIUS, first_leg_width: 2.000 INCHES NOMINAL IN, first_leg_length: 0.750 INCHES NOMINAL IN, second_leg_style: CORNER RADIUS. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-517-3424, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5340-517-3424
NSN: 5340-00-517-3424
FSC: 5340 — Hardware, Commercial
CAGE: A00AM — E.C.A ETABLISSEMENT CENTRAL DES APPROVISIONNEMENTS DES FORCES ARMEES ROYALES
SPECIFICATIONS
materialCOPPER ALLOY OR STEEL
first_leg_angle150.0 DEGREES NOMINAL
first_leg_styleCORNER RADIUS
first_leg_width2.000 INCHES NOMINAL IN
first_leg_length0.750 INCHES NOMINAL IN
second_leg_styleCORNER RADIUS
second_leg_width2.000 INCHES NOMINAL IN
special_featuresFIRST LEG HOLES THREADED 1/4-20 UNC-2B
style_designatorANGLE
second_leg_length0.880 INCHES NOMINAL IN
surface_treatmentENAMEL
first_leg_thickness0.250 INCHES NOMINAL IN
NSN5340-00-517-3424
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5340-517-3424 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.500 INCHES NOMINAL IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.380 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN
•
FIRST LEG HOLE DIAMETER: 0.250 INCHES NOMINAL IN
•
FIRST LEG ANGLE: 150.0 DEGREES NOMINAL
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 1.250 INCHES NOMINAL IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.390 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN
•
FIRST LEG CORNER RADIUS: 0.380 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.500 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.380 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN
FIRST LEG HOLE DIAMETER0.250 INCHES NOMINAL IN
FIRST LEG ANGLE150.0 DEGREES NOMINAL
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH1.250 INCHES NOMINAL IN
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG HOLE DIAMETER0.390 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN
FIRST LEG CORNER RADIUS0.380 INCHES NOMINAL IN
SECOND LEG WIDTH2.000 INCHES NOMINAL IN
SECOND LEG LENGTH0.880 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
5340005173424Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5340-517-3424?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5340-517-3424?
5340-517-3424 is a BRACKET,ANGLE.
What parts can replace 5340-517-3424?
There is 1 known substitute for 5340-517-3424: 5340005173424. Substitute compatibility should be verified for your specific system.
What is the NSN for 5340-517-3424?
5340-517-3424 is cataloged in the U.S. Government catalog under NSN 5340-00-517-3424. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5340-517-3424