The Clamp,loop, cataloged under National Stock Number 5340-01-630-2642, is classified within Federal Supply Class 5340 (Hardware, Commercial) of the Hardware and Abrasives group. The manufacturer of record is Umpco, Inc. Dba Umpco Inc. Government technical data includes 13 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 5340-01-630-2642 |
| Primary Part Number | S230G2 |
| Item Name | Clamp,loop |
| FSC / FSG | 5340 / 53 — Hardware, Commercial |
| Manufacturer | Umpco, Inc. Dba Umpco Inc |
| Status | ACTIVE |
| Distance From Outer Edge of Lug to Hole Center | 0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM IN |
| Style Designator | SINGLE LOOP |
| Diameter | 0.266 INCHES MINIMUM AND 0.296 INCHES MAXIMUM IN |
| Material Thickness | 0.016 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN |
| Distance From Loop Center to Tongue End | 0.608 INCHES NOMINAL IN |
| Surface Treatment | ZINC BAND |
| Tongue Hole Type | OBLONG |
| Center to Center Distance Between Loop and Mounting Hole | 0.562 INCHES MINIMUM AND 0.592 INCHES MAXIMUM IN |
| Material | STEEL BAND |
| Material | RUBBER ETHYLENE-PROPYLENE CLASS EPM CUSHION |
| Slot Width | 0.266 INCHES MINIMUM AND 0.296 INCHES MAXIMUM IN |
| Slot Length | 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN |
| Loop Inside Diameter | 0.105 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Unit of Issue | EA |
| Part Number | Manufacturer |
|---|---|
| S230G2 PRIMARY | Umpco, Inc. Dba Umpco Inc (USA) |
| Reference | Meaning |
|---|---|
| 13-1-0774 | 7/2 Vendor item drawing reference U.S. Government activity |
NSN 5340-01-630-2642 is a Clamp,loop, manufactured by Umpco, Inc. Dba Umpco Inc, classified under FSC 5340, Hardware, Commercial. Status: active.
NSN 5340-01-630-2642 has 1 manufacturer part number on file: S230G2 (Umpco, Inc. Dba Umpco Inc).
Key specifications for S230G2: Distance From Outer Edge of Lug to Hole Center: 0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM IN; Style Designator: SINGLE LOOP; Diameter: 0.266 INCHES MINIMUM AND 0.296 INCHES MAXIMUM IN; Overall Width: 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN. 13 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.