The Pad,cushioning, cataloged under National Stock Number 5340-01-525-9397, is classified within Federal Supply Class 5340 (Hardware, Commercial) of the Hardware and Abrasives group. The manufacturer of record is Raytheon Company. Government technical data includes 4 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 5340-01-525-9397 |
| Primary Part Number | 40A95782-3 |
| Item Name | Pad,cushioning |
| FSC / FSG | 5340 / 53 — Hardware, Commercial |
| Manufacturer | Raytheon Company |
| Status | ACTIVE |
| Length | 45.900 INCHES NOMINAL IN |
| Material Document and Classification | ZZ-R-765 FED SPEC SINGLE MATERIAL RESPONSE CUSHIONING |
| Width | 3.900 INCHES NOMINAL IN |
| Material | RUBBER SILICONE CLASS Q CUSHIONING |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Unit of Issue | EA |
| Part Number | Manufacturer |
|---|---|
| 40A95782-3 PRIMARY | Raytheon Company (USA) |
| Reference | Meaning |
|---|---|
| 40A95782-3 | 5/9 Secondary reference Hughes Missile Systems Co San Diego |
NSN 5340-01-525-9397 is a Pad,cushioning, manufactured by Raytheon Company, classified under FSC 5340, Hardware, Commercial. Status: active.
NSN 5340-01-525-9397 has 1 manufacturer part number on file: 40A95782-3 (Raytheon Company).
Key specifications for 40A95782-3: Length: 45.900 INCHES NOMINAL IN; Material Document and Classification: ZZ-R-765 FED SPEC SINGLE MATERIAL RESPONSE CUSHIONING; Special Features: MIL-P-24074 PTFE AND RUBBER SHALL BE CO-VULCANIZE BONDED, ETCHED SURFACE OF MIL-P-24074 PTFE TO INTERFACE WITH RUBBER. THE BOND STRENGTH SHALL BE 12 LB PER INCH OF WIDTH MINIMUM WHEN TESTED PER ASTM D1876 EXCEPT TESTING SPEED SHALL BE 2 INCHES PER MINUTE LBS; Width: 3.900 INCHES NOMINAL IN. 4 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.