The Rod,straight,headless, cataloged under National Stock Number 5340-01-507-6027, is classified within Federal Supply Class 5340 (Hardware, Commercial) of the Hardware and Abrasives group. Government technical data includes 8 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5340-01-507-6027 |
| Item Name | Rod,straight,headless |
| FSC / FSG | 5340 / 53 — Hardware, Commercial |
| Status | ACTIVE |
| Chamfer Length | 0.005 INCHES MINIMUM AND 0.005 INCHES MINIMUM AND 0.015 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED0.015 INCHES MAXIMUM IN |
| Overall Diameter | 0.750 INCHES NOMINAL IN |
| Drilled Hole Location | BOTH ENDS |
| Mounting Method | UNTHREADED HOLE(S) |
| Hole Diameter | 0.192 INCHES LOCATION NOT OTHERWISE SPECIFIED0.192 INCHES IN |
| Chamfer Angle | 45.0 DEGREES NOMINAL LOCATION NOT OTHERWISE SPECIFIED45.0 DEGREES NOMINAL |
| Distance From End to Hole Center | 0.280 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED0.280 INCHES NOMINAL IN |
| Material | ALUMINUM ALLOY 2024 OVERALLUNABLE TO DECODE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 2-13763-1 | C/1 Advisory reference — outside the item-of-supply concept Northrop Grumman Technical Services, Inc. Dba Defense Systems Sector |
| 2-13763-1 | 3/9 Design control — primary reference Northrop Grumman Systems Corporation Dba Northrop Grumman Is Div Northrop Grumman Aeronautics Systems |
NSN 5340-01-507-6027 is a Rod,straight,headless, classified under FSC 5340, Hardware, Commercial. Status: active.
Key specifications for 5340-01-507-6027: Chamfer Length: 0.005 INCHES MINIMUM AND 0.005 INCHES MINIMUM AND 0.015 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED0.015 INCHES MAXIMUM IN; Overall Diameter: 0.750 INCHES NOMINAL IN; Drilled Hole Location: BOTH ENDS; Mounting Method: UNTHREADED HOLE(S). 8 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.