The Clamp,loop, cataloged under National Stock Number 5340-01-498-1193, is classified within Federal Supply Class 5340 (Hardware, Commercial) of the Hardware and Abrasives group. The manufacturer of record is J & M Products, Inc. Government technical data includes 5 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 5340-01-498-1193 |
| Primary Part Number | JM44SP4H301RGB |
| Item Name | Clamp,loop |
| FSC / FSG | 5340 / 53 — Hardware, Commercial |
| Manufacturer | J & M Products, Inc |
| Status | ACTIVE |
| Material Document and Classification | AMS5510 ASSN STD SINGLE MATERIAL RESPONSE OR MIL-S-6721 MIL SPEC SINGLE MATERIAL RESPONSE BAND |
| Diameter | 0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN |
| Tongue Hole Type | ROUND, UNTHREADED |
| Material | RUBBER SILICONE CLASS Q CUSHION |
| Material | STEEL COMP 321 BAND |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Unit of Issue | EA |
| Part Number | Manufacturer |
|---|---|
| JM44SP4H301RGB PRIMARY | J & M Products, Inc (USA) |
| Reference | Meaning |
|---|---|
| 9D0071R10L | 5/2 Secondary reference U.S. Government activity |
| 12412HA1-10L | 3/2 Design control — primary reference U.S. Government activity |
NSN 5340-01-498-1193 is a Clamp,loop, manufactured by J & M Products, Inc, classified under FSC 5340, Hardware, Commercial. Status: active.
NSN 5340-01-498-1193 has 1 manufacturer part number on file: JM44SP4H301RGB (J & M Products, Inc).
Key specifications for JM44SP4H301RGB: Material Document and Classification: AMS5510 ASSN STD SINGLE MATERIAL RESPONSE OR MIL-S-6721 MIL SPEC SINGLE MATERIAL RESPONSE BAND; Diameter: 0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN; Special Features: CONTRACTOR'S NAME - CLAMP, LOOP -CUSHIONED, THREE WIRE, TRIANGULAR; HASRIBBED CUSHION; End Item Identification: C-17A ACFT A. 5 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.